Concrete
H65SD2
H65SD2 AHB Aluminum Housing Body, 40 lb 1-1/8" Hex Demolition Hammer

The H65SD2 Demolition Hammer is ideal for demolishing concrete, groove and channel digging in concrete, asphalt and gravel, tamping/compacting asphalt and gravel roads, cutting asphalt, construction work, piping and wiring work and water supply and drain work.

H90SG
H90SG AHB Aluminum Hou sing Body, UVP User Vibration Protection, 70 lb 1-1/8" Hex Demolition Hammer

The H90SG 70 lb demolition hammer makes improvements on previous models with greater power, increased performance, lower vibration and a universal tool retainer. The 15 amp motor powers an improved hammering mechanism, which more efficiently transfers energy to the bit, improving demolition performance. A new vibration absorbing main handle produces low full-load vibration, resulting in less user fatigue and greater productivity. This hammer employs a sealed grease system and auto-stop brushes for minimal maintenance and durability.

DH38MS
DH38MS 1-1/2" SDS Max Rotary Hammer

The DH38MS SDS Max Shank Rotary Hammer features a simple knob that changes the mode from hammer drilling to hammer only, allowing it to take on a variety of tasks including drilling holes in concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, taming, or driving ground rods.

DH40MEY
DH40MEY 1-9/16" AC Brushless, AHB Aluminum Housing Body, UVP User Vibration Protection, AC/DC SDS Max Rotary Hammer

The DH40MEY Rotary Hammer with AC Brushless Motor, UVP (User Vibration Protection) and AHB (Aluminum Housing Body) is the perfect combination of performance and comfort.  With top class drilling speed along with UVP, this hammer is made for hard work. It features the AHB construction that provides significant durability and extended tool life. The Brushless Motor allows the tool to operate over an extra long extension cord with reduced power loss, and also eliminates maintenance of armatures or carbon brushes. This rotary hammer delivers superior performance when powered by a generator due to an internal inverter circuit that regulates uneven power supply for ultimate jobsite convenience.

DH40MR
DH40MR 1-9/16" AHB Aluminum Housing Body SDS Max Shank Rotary Hammer

The DH40MR SDS Max Rotary Hammer features a drilling speed that is 10% faster than similar products, while at the same time, produces lower vibration and noise levels than other tools in its class. With an increase in performance, operability and durability the DH40MR takes rotary hammers to a new level.

DH45ME
DH45ME 1-3/4" AC Brushless, AHB Aluminum Housing Body, AC/DC SDS Max AC Rotary Hammer

The DH45ME Rotary Hammer with AC Brushless Motor and AHB (Aluminum Housing Body) construction is the perfect combination of performance and comfort.  With top class drilling speed, this hammer is made for hard work. It features the AHB construction that provides significant durability and extended tool life. The Brushless Motor allows the tool to operate over an extra long extension cord with reduced power loss, and also eliminates maintenance of armatures or carbon brushes. This rotary hammer delivers superior performance when powered by a generator due to an internal inverter circuit that regulates uneven power supply for ultimate jobsite convenience.

DH45MEY
DH45MEY 1-3/4" AC Brushless, AHB Aluminum Housing Body, UVP User Vibration Protection, AC/DC SDS Max Rotary Hammer

The DH45MEY Rotary Hammer with AC Brushless Motor, UVP (User Vibration Protection) and AHB (Aluminum Housing Body) is the perfect combination of performance and comfort.  With top class drilling speed along with UVP, this hammer is made for hard work. It features the AHB construction that provides significant durability and extended tool life. The Brushless Motor allows the tool to operate over an extra long extension cord with reduced power loss, and also eliminates maintenance of armatures or carbon brushes. This rotary hammer delivers superior performance when powered by a generator due to an internal inverter circuit that regulates uneven power supply for ultimate jobsite convenience.

DH52ME
DH52ME 2-1/16" AC Brushless, AHB Aluminum Housing Body, AC/DC SDS Max Rotary Hammer

The DH52ME Rotary Hammer with AC Brushless Motor and AHB (Aluminum Housing Body) is the perfect combination of performance and comfort.  With top class drilling speed, this hammer is made for hard work. It features the AHB construction that provides significant durability and extended tool life. The Brushless Motor allows the tool to operate over an extra long extension cord with reduced power loss, and also eliminates maintenance of armatures or carbon brushes. This rotary hammer delivers superior performance when powered by a generator due to an internal inverter circuit that regulates uneven power supply for ultimate jobsite convenience.

DH52MEY
DH52MEY 2-1/16" AC Brushless, AHB Aluminum Housing Body, UVP User Vibration Protection, AC/DC SDS Max Rotary Hammer

The DH52MEY Rotary Hammer with AC Brushless Motor, UVP (User Vibration Protection) and AHB (Aluminum Housing Body) is the perfect combination of performance and comfort.  With top class drilling speed along with UVP, this hammer is made for hard work. It features the AHB construction that provides significant durability and extended tool life. The Brushless Motor allows the tool to operate over an extra long extension cord with reduced power loss, and also eliminates maintenance of armatures or carbon brushes. This rotary hammer delivers superior performance when powered by a generator due to an internal inverter circuit that regulates uneven power supply for ultimate jobsite convenience.

DH26PF
DH26PF 1" 3-Mode D-Handle SDS Plus Rotary Hammer

The DH26PF 1" SDS Plus Rotary Hammer offers the end-user 3-modes of operation. It covers multiple jobsite needs from drilling, chipping and hammer drilling into concrete, brick or stone with ease. It delivers a top of class drilling speed with higher amps, greater capacity, larger change lever, double overlay side and trigger handles and improved internal mechanics compared to the previous model. The DH26PF is the ideal tool for plumbing and conduit installation, HVAC and pest control installation, electrical installation, construction and repair work and other civil engineering applications.

DH28PC
DH28PC 1-1/8" 3-Mode L-Style SDS Plus Rotary Hammer

The DH28PC Rotary Hammer offers the end user three modes of operation. Its rotation and striking mode can be used to drill anchor holes in concrete, tile and brick. The rotation-only mode can be used to drill holes in steel or tighten machine/wood screws. The third mode is the striking-only mode. This mode has the ability to strip mortar and tiles, demolish and chisel concrete and groove cut bricks. This hammer is specifically designed to fit in tight spaces.

DH28PFY
DH28PFY 1-1/8" 3-Mode D-Handle SDS Plus Rotary Hammer w/ UVP User Vibration Protection

The DH28PFY 1-1/8" SDS Plus Rotary Hammer featuring User Vibration Protection (UVP) technology offers the end-user 3-modes of operation. It covers multiple jobsite needs from drilling, chipping and hammer drilling into concrete, brick or stone with ease. It delivers a top of class drilling speed with higher amps, greater capacity, larger change lever, double overlay side and trigger handles and improved internal mechanics compared to the previous model. The DH28PFY is the ideal tool for plumbing and conduit installation, HVAC and pest control installation, electrical installation, construction and repair work and other civil engineering applications.

DH38YE2
DH38YE2 1-1/2" Spline Shank Rotary Hammer

The DH38YE2 Spline Shank Rotary Hammer is the next generation in Hitachi hammer technology.  Compared to its predecessor the DH38YE, the DH38YE2 packs power into a more ergonomic body that is 2.9 lbs lighter, while delivering less vibration and a lower noise level. The DH38YE2 is designed for drilling holes in concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods.

DH40FR
DH40FR 1-9/16" AHB Aluminum Housing Body Spline Shank Rotary Hammer

The DH40FR Rotary Hammer features a drilling speed that is 10% faster than similar products, while at the same time, produces lower vibration and noise levels than other tools in its class. With an increase in performance, operability and durability the DH40FR takes rotary hammers to a new level.

CC12Y
CC12Y 15-Amp, AC/DC 12" Portable Cut-Off Saw

The CC12Y 12" Cut-off Saw cuts sheet metal, concrete, cinder blocks, bricks, reinforcing rods, concrete wire mesh, corrugated floor and ceiling forms.

CM4SB2
CM4SB2 4" Dry Cut Masonry Saw

The CM4SB2 4" Dry-Cut Masonry Saw cuts smoothly through tile, marble, granite, concrete, brick and similar materials. It is the ideal dry-cut saw for professionals who demand a workhorse of a tool at a competitive value.

CM75EBP
CM75EBP 14" 75cc 2-Stroke Gas Cut-Off Saw w/ New PureFire Engine

The CM75EBP 14" 75cc Gas Cut-Off Saw is designed with the professional in mind and is ideal for new construction and renovation jobs that require cutting concrete for small openings for windows and doors and/or cutting paving stones and curbstone in landscaping applications. Portable and easy-to-use, this handheld machine is made for ultimate performance from it's heavy-duty three-stage air filter to the standard water kit to on board tool storage.

VB16Y
VB16Y 40 lb Portable Rebar Bender/Cutter

Hitachi's VB16Y Portable Rebar Cutter and Bender offers jobsite simplicity, precision, and portability promising to dramatically reduce the cost of on-site rebar installation. Unlike other machines on the market, the VB16Y can both bend and cut rebar and is easily transportable.