Hitachi Power Tools

Hitachi: Inspire the Next

Pneumatics

Pneumatics

Framing Nailers

KNR90AE

Hitachi's KNR90AE is a 3-piece Round Head Framing Nailer Combo Kit. This kit includes the NR90AEPR 3-1/2" plastic strip collated framing nailer, the EC89 portable 4-gallon twin stack air compressor and a 25' x 1/4" PVC air hose. It is a convenient kit to get started with any framing application.

NR83A2

The NR83A2 Full Round Head Framing Nailer with Depth Adjustment is used for floor and wall framing, truss build-up, window build-up, etc. construction of subflooring and roof decking, wall sheathing and mobile home and modular house construction.

NR83A2(S)

The NR83A2(S) Full Round Head Framing Nailer (without depth adjustment) is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and mobile home and modular house construction.

NR83A2(S1)

The NR83A2(S1) Full Round Head Framing Nailer (without Depth Adjustment) features a new, more secure selective actuation switch . It is designed for floor and wall framing, truss build-up, window build-up, construction of sub-flooring and roof decking, wall sheathing and mobile home and modular home construction.

NR83A2(Y)

The NR83A2(Y) Full Round Head Framing Nailer with Depth Adjustment features a new, more secure selective actuation switch. It is designed for floor and wall framing, truss build-up, window build-up, construction of sub-flooring and roof decking, wall sheathing and mobile home and modular home construction.

NR83A3

The NR83A3 Full Round Head Framing Nailer with Depth Adjustment is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and mobile home and modular home construction.

NR83A3(S)

The NR83A3(S) Full Round Head Framing Nailer (without Depth Adjustment) is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and mobile home and modular home construction.

NR83AA3

The NR83AA3 Clipped Head Framing Nailer is used for floor and wall framing, truss build-up, window build-up, etc. construction of subflooring and roof decking, wall sheathing and mobile home and modular house construction.

NR83AA3(S)

The NR83AA3(S) clipped head framing nailer is equipped with a new, more secure selective actuation switch. It drives paper collated nails from 2" up to 3-1/4" in length and is designed for floor and wall framing, truss build-up, window build-up, construction of sub-flooring and roof decking, wall sheathing and modular house construction.

NR83AA4

The NR83AA4 Clipped Head Framing Nailer has the legendary durability and reliability that a Hitachi nailer is known for, but now with faster driving speed and improved response. With the power to drive 2" - 3-1/4" nails into the toughest materials, there is no job this tool can't handle. It is ideal for floor and wall framing, truss build-up, window build-up, etc. construction of subflooring and roof decking, wall sheathing and mobile home and modular house construction.

NR90AD(S)

The NR90AD(S) framing nailer features a new non-slip elastomer grip trigger and ergonomically designed simple flip actuation switch. It drives paper tape collated nails from 2" up to 3-1/2" in length. Weighing only 7.0 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build-up, window build-up, sub-flooring, roof decking, wall sheathing and housing construction.

NR90ADPR

The NR90ADPR framing nailer drives paper collated nails from 2 inches up to 3-1/2 inches in length. Weighing only 7 lbs, it is 15% lighter than the leading competitive tools making it easier to use all day, while still providing the power of heavier, bulkier nailers. This nailer can be used for floor and framing, truss build-up, window build-up, subflooring, roof decking, wall sheathing and housing construction.

NR90AE(S)

The NR90AE(S) framing nailer features a new non-slip elastomer grip trigger and ergonomically designed simple flip actuation switch. It drives plastic collated nails from 2" up to 3-1/2" in length. Weighing only 7.5 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.

NR90AEPR

The NR90AEPR framing nailer drives plastic collated nails from 2 inches up to 3-1/2 inches in length. Weighing only 7.5 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build-up, window build-up, subflooring, roof decking, wall sheathing and housing construction.

NR90AF

The NR90AF is lightweight and powerful- ideal for framing, siding, decking, pallet assembly, trusses and sheathing.

NR90AF(S)

The NR90AF(S) framing nailer features a new non-slip elastomer grip trigger and ergonomically designed simple flip actuation switch. It drives wire weld collated offset round nails from 2" up to 3-1/2" in length. Weighing only 7.3 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for framing, siding, decking, pallet assembly, trusses and sheathing.

NR90GC2

The NR90GC2 3-1/2 inch Gas Powered Paper Collation Framing Nailer combines cordless utility with traditional framing nailer power. No compressor noise or hoses to wind saves time and energy. Improvements on this second generation tool include a new air filter design, reversible rafter hook and a new switch, which requires less pushing force to operate. This gas nailer is ideal for general contractors, remodelers, construction and service workers who do framing, sub-flooring, fencing, sheathing, decking, truss build-up, modular housing construction, remodeling and punch-list work.

NR90GR2

The NR90GR2 Gas Powered Plastic Strip Collated Framing Nailer combines utility with traditional nailing power. No compressor noise or hoses to wind saves time, and clean up time after the job is reduced. This nailer is ideal for general contractors who do framing, sub-flooring, fencing, sheathing, decking, truss build-up, modular home construction, remodeling and punch out work.

Finish Nailers

NP35A

Hitachi's NP35A micro pin nailer drives 23-gauge headless pin nails, which produce nearly invisible holes. Lightweight and compact, the NP35A may be used in a variety of applications including cabinets, paneling, small molding and trim, glazed bead, craft work and picture frame assembly.

NT32AE2

The NT32AE2 1-1/4" 18-Gauge Finish Nailer is ideal for trim work, furniture building and other finish applications. It accepts finish nails from 5/8" in length up to 1-1/4".

NT32AE2(S)

The NT32AE2(S) 1-1/4" 18-gauge finish nailer features a non-slip elastomer grip trigger and ergonomically designed simple flip actuation switch. It is ideal for trim work, furniture building and other finish applications. The NT32AE2(S) accepts finish nails from 5/8" in length up to 1-1/4".

NT50AE2

The NT50AE2 2" 18-Gauge Finish Nailer is ideal for trim work, furniture building and other finish applications. It accepts finish nails from 5/8" in length up to 2".

NT50AE2(S)

The NT50AE2(S) 2" 18-Gauge Finish Nailer features a non-slip elastomer grip trigger and ergonomically designed simple flip actuation switch. It is ideal for trim work, furniture building and other finish applications. The NT50AE2(S) accepts finish nails from 5/8" up to 2".

NT50GS

The NT50GS 18-Gauge Brad Nailer allows the user to move easily around the jobsite without hoses or compressors! Features include low battery indicator, variable position hook, tool-less jam release and tool-less depth of drive. This 18-Gauge cordless gas nailer drives nails from 5/8" to 2" in length and can be used for a variety of applications including molding installation, cabinet and picture frame assembly, wainscoting, chair rail, window and door casing and decorative trim.

NT65GA

The NT65GA 15-Gauge Finish Nailer allows the user to move easily around the jobsite without hoses or compressors!  Features include dry fire lockout, low battery indicator, variable position hook, and tool-less jam release and depth of drive.  The NT65GA drives nails from 1-1/4" to 2-1/2" in length and can be used for a variety of applications including installation of door and window casings, cabinets and decorative molding.

NT65GB

The NT65GB 16-Gauge Finish Nailer allows the user to move easily around the jobsite without hoses or compressors!  Features include dry fire lockout, low battery indicator, variable position hook, andtool-less jam release and depth of drive.  The NT65GB drives nails from 1-1/4" to 2-1/2" in length and can be used for a variety of finish and trim applications including installation of door jambs, baseboard, chair rails, window casings and crown moulding.

NT65GS

The NT65GS 16-Gauge Finish Nailer allows the user to move easily around the jobsite without hoses or compressors!  Features include dry fire lockout, low battery indicator, variable position hook, and tool-less jam release and depth of drive.  The NT65GS drives nails from 1" to 2-1/2" in length and can be used for a variety of applications including installation of door jambs, baseboard, chair rails, window casings and crown molding.

NT65M2

The NT65M2 16-Gauge finish nailer is ideal for installing molding, chair rail, cabinetry and other fine finish applications. It accepts 16-Gauge finish nails in lengths ranging from 1" up to 2-1/2" and features Hitachi's signature air duster button to conveniently blow away dust and debris instantly with the simple push of a button.

NT65M2(S)

The NT65M2(S) 16-gauge finish nailer features a non-slip elastomer grip trigger and ergonomically designed simple flip actuation switch. It is ideal for installing molding, chair rail, cabinetry and other fine finish applications. The NT65M2(S) accepts 16-gauge finish nails in lengths ranging from 1" up to 2-1/2" and is equipped with Hitachi's signature air duster button to conveniently blow away dust and debris instantly to clear the work surface.

NT65MA4

The NT65MA4 15-Gauge angled finish nailer is the ideal nailer for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases. Its compact body and angled magazine make for easier placement and operation in tight angles. The integrated air duster clears debris from the work site allowing for faster and cleaner job completion. The NT65MA4 accepts 15-gauge nails from 1-1/4" up to 2-1/2" in length.

NT65MA4(S)

The NT65MA4(S) 15-gauge angled finish nailer features a new, non-slip elastomer grip trigger and ergonomically designed simple flip actuation switch. It is the ideal nailer for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases. The compact body and angled magazine make for easier placement and operation in tight angles. The integrated air duster clears debris from the work site allowing for faster and cleaner job completion. The NT65MA4(S) accepts 15-gauge nails from 1-1/4" up to 2-1/2" in length.

Roofing Nailers

NV45AB2

The NV45AB2's "magazine, depth of drive, and bullet proof design are excellent; you could probably drive an 18-wheeler over this tool and it would still work," Tools of the Trade Magazine, July/August 2005. The 1-3/4" Roofing Nailer is used for various construction works such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine.

NV45AE

The NV45AE coil roofing nailer combines Hitachi's traditional two cylinder valve firing system with new features and next generation "Industrial Design." The NV45AE's low recoil, cylinder valve system, optimized weight and well-balanced design provide the best driving feel for users. Minimal air consumption per shot and a pneumatic air feeding mechanism deliver stable shooting nail after nail.

NV45AE(S)

The NV45AE(S) bottom load coil roofing nailer features Hitachi's traditional two cylinder valve firing system with new features. The NV45AE(S)' low recoil, cylinder valve system, optimized weight and well-balanced design provides the best driving feel for users. Minimal air consumption per shot and a pneumatic air feeding mechanism deliver stable shooting nail after nail.

Specialty Nailers

NC40G

The NC40G 1-9/16" Gas Powered Concrete Nailer is designed for fastening wood and steel to concrete. It drives up to 1-9/16" x .102" plastic head collated pins. Gas power allows the user to work without the need for licensing, unlike powder-actuated tools.

NR65AK

The NR65AK is used for fastening various types of pre-punched hole metal connectors to wood.

NR65AK(S)

The NR65AK(S) is used for fastening various types of pre-punched hole metal connectors to wood.

NV50AP3

The NV50AP3 Cap Nailer is used to apply house wrap, roofing felt and other sheathing installation. This tool has been redesigned to include even more contractor requested features ensuring even better performance and more durable results.

NV65AH

The NV65AH Siding Nailer "Another very light nailer, the NV65AH is a well-engineered tool. It's packed with great features like a tool-less depth adjustment and a 360-degree exhaust diverter. It will feed either wire- or plastic-collated nails. It also ships with a non-marring tip. Our experience with Hitachi nailers leads us to believe that this is one of the most dependable tools we tested." (Davis, Tool Test: Siding Nailers: Side Winders; Tools of the Trade Nov./Dec. 2000:42-51)

NV75AG

Hitachi's Lightweight Coil Nailer is designed to drive 3" nails, which are the most commonly used length for framing, siding, fencing, decking and many other construction applications.

NV83A4

The NV83A4 Round Head Coil Framing Nailer is used for construction work such as wall sheathing, roof decking, subflooring, mobile and modular home construction, making of wooden boxes, pallets and drums, packing operations in manufacturing plants, and for other types of general packing and crating work.  A selective actuation switch was added to improve functionality and ensures proper nail placement, and a steel tool-less depth of drive dial instead of plastic improves durability.  The NV83A4 provides the same high quality performance and durability expected from Hitachi.

NV90AG

The NV90AG 3-1/2" coil framing nailer packs both the driving power you need and the convenience you want into one, surprisingly lightweight package. It is capable of handling a variety of tasks, driving nails from 1--3/4" x .099" to 3-1/2" x .131". Coil framing nailers are not known for their compact designs, but this coil framing nailer weighs in at only 7.7 lbs with a head height of just 13-1/6". Equipped with a steel head plate for increased durability, this nailer can handle any jobsite need.

Utility Nailers

NV50A1

The NV50A1 Wire Collated Utility Nailer is used for the production of wooden boxes, light pallets, wooden furniture, wooden sashes, packing and crate operations in manufacturing plants and construction work such as prefabricated frames.

NV50AA

The NV50AA Plastic Collated Utility Nailer is used for construction work such as wall sheathing, roof decking and subflooring. This model is also ideal for mobile and modular home construction.

Gas Nailers

NC40G

The NC40G 1-9/16" Gas Powered Concrete Nailer is designed for fastening wood and steel to concrete. It drives up to 1-9/16" x .102" plastic head collated pins. Gas power allows the user to work without the need for licensing, unlike powder-actuated tools.

NR90GC2

The NR90GC2 3-1/2 inch Gas Powered Paper Collation Framing Nailer combines cordless utility with traditional framing nailer power. No compressor noise or hoses to wind saves time and energy. Improvements on this second generation tool include a new air filter design, reversible rafter hook and a new switch, which requires less pushing force to operate. This gas nailer is ideal for general contractors, remodelers, construction and service workers who do framing, sub-flooring, fencing, sheathing, decking, truss build-up, modular housing construction, remodeling and punch-list work.

NR90GR2

The NR90GR2 Gas Powered Plastic Strip Collated Framing Nailer combines utility with traditional nailing power. No compressor noise or hoses to wind saves time, and clean up time after the job is reduced. This nailer is ideal for general contractors who do framing, sub-flooring, fencing, sheathing, decking, truss build-up, modular home construction, remodeling and punch out work.

NT50GS

The NT50GS 18-Gauge Brad Nailer allows the user to move easily around the jobsite without hoses or compressors! Features include low battery indicator, variable position hook, tool-less jam release and tool-less depth of drive. This 18-Gauge cordless gas nailer drives nails from 5/8" to 2" in length and can be used for a variety of applications including molding installation, cabinet and picture frame assembly, wainscoting, chair rail, window and door casing and decorative trim.

NT65GA

The NT65GA 15-Gauge Finish Nailer allows the user to move easily around the jobsite without hoses or compressors!  Features include dry fire lockout, low battery indicator, variable position hook, and tool-less jam release and depth of drive.  The NT65GA drives nails from 1-1/4" to 2-1/2" in length and can be used for a variety of applications including installation of door and window casings, cabinets and decorative molding.

NT65GB

The NT65GB 16-Gauge Finish Nailer allows the user to move easily around the jobsite without hoses or compressors!  Features include dry fire lockout, low battery indicator, variable position hook, andtool-less jam release and depth of drive.  The NT65GB drives nails from 1-1/4" to 2-1/2" in length and can be used for a variety of finish and trim applications including installation of door jambs, baseboard, chair rails, window casings and crown moulding.

NT65GS

The NT65GS 16-Gauge Finish Nailer allows the user to move easily around the jobsite without hoses or compressors!  Features include dry fire lockout, low battery indicator, variable position hook, and tool-less jam release and depth of drive.  The NT65GS drives nails from 1" to 2-1/2" in length and can be used for a variety of applications including installation of door jambs, baseboard, chair rails, window casings and crown molding.

Staplers

N3804AB3

The N3804AB3 narrow crown stapler is ideal for internal and external trim work, furniture, cabinetry and other fine finish work. It accepts 18-Gauge narrow crown staples ranging in length from 1/2" up to 1-1/2".

N3804AB3(S)

The N3804AB3(S) narrow crown stapler features a non-slip grip trigger and ergonomically designed simple flip actuation switch. It is ideal for internal and external trim work, furniture, cabinetry and other fine finish work. The N3804AB3(S) accepts 18-gauge narrow crown staples ranging in length from 1/2" up to 1-1/2".

N5008AC2

The N5008AC2 standard crown stapler is used for construction work such as wall sheathing, roof decking, subfloor installation, mobile and modular home construction and assembling wooden crates and expendable pallets.

N5010A

The N5010A is ideal for many fastening and installation applications including subflooring, insulation, wall and roof sheathing, and floor and roof decking.  It can also be used for cabinetry installation and pallet assembly.

N5021A

The N5021A is ideal for many fastening and installation applications including installing wire lathing, housewrap, roofing materials, and insulation.

N5024A2

The N5024A2 wide crown stapler is ideal for lathing, sheathing and insulation installation. Its lighter weight (only 4.7 lbs) and cylinder valve firing mechanism  provide a powerful response and less user fatigue.

Compressors

EC1110

The EC1110 compressor combines exceptional portability with consistent jobsite performance. The 1.6 HP, 15-Amp motor delivers up to 145 PSI of pressure, to power through even the toughest fastening applications. The large 5-gallon tank is easy to transport with its 10" never flat wheel and dual retractable handles. With two universal couplers and fully adjustable regulator, the EC1110 offers both quality and convenience.

EC119SA

This portable compressor features a 15 amp induction motor for quiet operation  and extended life. The EC119SA ships ready to work with two factory installed couplers and a bottle of synthetic oil. For the contractor seeking plug and play convenience and jobsite durability combined, this hand carry air compressor is ideal.

EC12

The EC12 2.0 Peak Hp Air Compressor effectively provides air pressure sufficient to support any pneumatic air-nailer.

EC2510E

The EC2510E combines contractor grade quality with simplified operation. Designed to work day-in and day-out, this compressor provides plenty of air and cycles from 116 PSI to a maximum of 145 PSI so it turns on well before tools requirements are compromised.

EC25E

Hitachi adds a twist to its line of air compressors with its gas powered air compressor, which boasts a Honda engine and can deliver 9 cubic feet per minute of air at 100 pounds per square inch.

EC510

The EC510 6-gallon pancake compressor is ideal for finish work and trim. The oil-free pump is capable of producing 2 cfm @ 90 PSI and 145 PSI of max working pressure. The two universal quick couplers and easy turn drain valve make the EC510 convenient, while the compact, lightweight design ensures easy portability. By including a 25ft 1/4" diameter PVC hose with 1/4" NPT plug and coupler, this unit is ready right out of the box.

EC89

The EC89 Twin Stack Compressor features an oil-lubricated cast iron pump and 13 Amp direct drive induction motor for longer life. Weighing just 57 lbs, the EC89 has an ergonomic carrying handle to make it easier to transport to any jobsite. A quick coupler is factory installed on the unit so it is ready to go out of the box. 

KNR90AE

Hitachi's KNR90AE is a 3-piece Round Head Framing Nailer Combo Kit. This kit includes the NR90AEPR 3-1/2" plastic strip collated framing nailer, the EC89 portable 4-gallon twin stack air compressor and a 25' x 1/4" PVC air hose. It is a convenient kit to get started with any framing application.

Generators