Hitachi Power Tools

Hitachi: Inspire the Next

New Products

New Products

New Concrete & Masonry

H41MB

The H41MB SDS Max demo hammer features 7.4 ft-lbs of impact energy and an excellent power to weight ratio. Weighing in at just 11.2 lbs, the light weight and compact design allows for increased maneuverability and less user fatigue. The motor has been reinforced to increase rigidity and decrease unwanted motor vibration, extending motor life. This hammer also has a variable lock mechanism for simple adjustment of the chisels to multiple angles, and a soft grip adjustable handle.

H90SG

The H90SG 70 lb demolition hammer makes improvements on previous models with greater power, increased performance, lower vibration and a universal tool retainer. The 15 amp motor powers an improved hammering mechanism, which more efficiently transfers energy to the bit, improving demolition performance. A new vibration absorbing main handle produces low full-load vibration, resulting in less user fatigue and greater productivity. This hammer employs a sealed grease system and auto-stop brushes for minimal maintenance and durability.

New Cordless

DH18DSLP4

The DH18DSLP4 is a cordless rotary hammer designed with two modes for optimal performance when drilling holes for the installation of concrete anchors. Available as a tool body only, this rotary hammer is compatible with all Hitachi 18V Lithium Ion slide-type batteries.

DN18DSLP4

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the DN18DSLP4 18V 3/8" Right Angle Drill is designed with the professional in mind. Available as a tool body only, this angle drill is compatible with all Hitachi 18V Lithium Ion slide batteries (sold separately)and can drill and drive into tight spaces that ordinary drills would have trouble reaching. The 3/8" keyless chuck accepts a wide range of bits and the tool delivers enough torque to serve as a powerful solution to satisfy most drilling and driving needs. It is equipped with a convenient LED light and comes with a side handle for control. A low battery indicator alerts the user to reduce downtime on the job.

DS10DFL2

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the DS10DFL2 12-Volt Peak driver drill is impressively compact and lightweight at just 2.2 lbs. With two speed settings and 300 in/lbs of torque, the lightweight design doesn't come at the cost of power. This drivers small size is ideal for installation, electrical, HVAC and other trade applications, as well as woodworking and fine finish applications.

DS18DBL

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the DS18DBL brushless driver drill is the first in a series of 18V brushless Lithium Ion cordless tools. With Brushless technology the tool's motor is managed by a micro processor, which results in ultimate efficiency. Brushless technology results in up to 50% longer run time between battery charges, increased power and extended durability with essentially no maintenance. Hitachi's signature ergonomic design for the tool body makes it extremely well-balanced and comfortable for extended use.

DS18DGL

Covered by Hitachi's Lifetime Lithium Ion tool warranty and 2-year Lithium Ion battery warranty, the DS18SGL features a compact, yet efficient battery. With 400 in/lbs of torque, this drill can power through any tough job with ease. A convenient LED light illuminates dark work spaces and a keyless 1/2" chuck provides simple bit replacements. It also features a 22+1 stage clutch with 22 torque settings and a drill mode for precision and control.

DS18DSDL

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the DS18DSDL driver drill is powered by an 18V Lithium Ion slide-type battery for fade free power, less weight and 3x the total battery life of traditional batteries. Built with a heavy-duty, industrial grade 2-piece motor, the DS18DSDL driver drill is able to handle just about any task like boring large holes into wood or driving large lag bolts, yet its 22-position clutch allows the user to adapt to low-torque applications such as hardware installation or furniture assembly.

DV18DBFL

Covered by Hitachi's Lifetime Lithium Ion tool warranty and powered by Brushless Motor Technology, the DV18DBFL is the latest addition to Hitachi's Brushless Lithium Ion cordless tool series. This next generation technology manages the tool's motor through use of a micro-processor, resulting in ultimate efficiency. Not only does this technology remove the hassle and downtime of having to replace brushes, but it also eliminates the traditional wear on the trigger switch and the armature, creating an extremely durable tool that is essentially maintenance free. Additionally, the increased efficiency of the micro-processor managed motor results in up to 30% additional run time between battery charges.

DV18DBL

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the DV18DBL hammer drill is part of a series of 18V Brushless Lithium Ion cordless tools. Hitachi's Brushless motor technology delivers more power to the motor by minimizing unnecessary energy loss through friction and heat. Managed by a micro-processor chip that efficiently delivers current flow to the motor, Brushless tools experience up to 50% longer run time between charges, increased power, and extended durability with essentially no maintenance. Hitachi' s signature ergonomic design for the tool body makes it extremely well-balanced and comfortable for extended use.

DV18DSDL

Covered by Hitachi's Lifetime Lithium Ion tool warranty and two-year Lithium Ion battery warranty, the DV18DSDL hammer drill is powered by an 18V Lithium Ion slide-type battery for fade free power, less weight and 3x the total battery life of traditional batteries. Built with a heavy-duty, industrial grade 2-piece motor, the DV18DSDL hammer drill is able to handle just about any task like boring large holes into wood, drilling into concrete or driving lag bolts, yet its 22-position clutch allow the user to adapt to low torque applications such as hardware installation or furniture assembly.

G18DSLP4

The G18DSLP4 is lightweight, compact and cordless! Available as a tool body only, it is compatible with all Hitachi 18V Lithium Ion slide-type batteries. The grinder can cut rebar or pipe, groove stone or concrete or grind metal and masonry.

GP10DL

The GP10DL mini grinder is compact and cordless, ideal for finishing work and precision grinding projects. The slim soft grip handle and innovative anti-vibration technology combine to create a feeling of total comfort and control. It is covered by Hitachi's one-year tool warranty and two-year Lithium Ion battery warranty.

KC10DFL2

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the KC10DFL2 is a 12V Peak Combo Kit that includes a driver drill (DS10DFL2) and an impact driver (WH10DFL2). Also included are two 12V Peak Lithium Ion batteries, a 5-position flashlight, quick charger, carrying case, 7-piece bit set and a Phillips #2 driver bit. This compact kit is ideal for installations, electrical work, HVAC and other trade applications as well as for woodworking and fine finish applications.

KC18DGL

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the KC18DGL is an 18V Combo Kit that includes a driver drill (DS18DGL) and an impact driver (WH18DGL). Included alongside the tools are two 18V Lithium Ion batteries that provide fade free power, less weight and 3X the total battery life of traditional NiCd batteries.  Other items included are a quick charger, carrying bag and a double ended Phillips #2 driver bit.

KC18DJL

Covered by Hitachi's Lifetime Lithium Ion tool warranty and powered by Brushless Motor Technology, the KC18DJL is the latest addition to Hitachi's Brushless Lithium Ion cordless tool series. This next generation technology manages the tool's motor through use of a micro-processor, resulting in ultimate efficiency. Not only does this technology remove the hassle and downtime of having to replace brushes, but it also eliminates the traditional wear on the trigger switch and the armature, creating an extremely durable tool that is essentially maintenance free. Additionally, the increased efficiency of the micro-processor managed motor results in up to 50% additional run time between battery charges.

P18DSLP4

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the P18DSLP4 cordless planer combines comfort and convenience with fade free power, lighter weight and longer total battery life that comes from Lithium Ion battery power. Available as tool body only, it is compatible with all Hitachi's 18V Lithium Ion slide-type batteries (sold separately) and is capable of generating a no-load speed of 16,000 RPM with a 3-1/4" cutting width and a cutting depth of up to 5/64". This ergonomic tool is only 7.3 lbs and is equipped with a battery charge indicator light that warns when the battery life if getting low to reduce unexpected downtime.

RB18DSLP4

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the RB18DSLP4 is a compact 18V blower that has a lot of power for sweeping large surfaces. Available as a tool body only, the RB18DSLP4 features an impressive blowing power for fast and efficient cleaning for any workshop or home. It is compatible with all Hitachi 18V Lithium Ion slide-type batteries (sold separately).

WH10DFL2

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the WH10DFL2 is a compact and lightweight cordless impact driver. It delivers 955 in/lbs of torque in a compact size tool that weighs only 2.2 lbs. It is ideal for applications such as tightening bolts and sinking screws as well as projects like installing cabinetry and windows and hanging doors.

WH18DBDL

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the WH18DBDL impact driver is part of a series of 18V Brushless Lithium Ion cordless tools. Hitachi's Brushless motor technology delivers more power to the motor by minimizing unnecessary energy loss through friction and heat. Managed by a micro-processor chip that efficiently delivers current flow to the motor, Brushless tools experience up to 50% longer run time between charges, increased power, and extended durability with essentially no maintenance. Hitachi's signature ergonomic design for the tool body makes it extremely well-balanced and comfortable for extended use.

WH18DBFL

Covered by Hitachi's Lifetime Lithium Ion tool warranty and powered by Brushless Motor Technology, the WH18DBFL is the latest addition to Hitachi's Brushless Lithium Ion cordless tool series. This next generation technology manages the tool's motor through use of a micro-processor, resulting in ultimate efficiency. Not only does this technology remove the hassle and downtime of having to replace brushes, but it also eliminates the traditional wear on the trigger switch and the armature, creating an extremely durable tool that is essentially maintenance free. Additionally, the increased efficiency of the micro-processor managed motor results in up to 30% additional run time between battery charges.

WH18DGL

Covered by Hitachi's Lifetime Lithium Ion tool warranty and 2-year Lithium Ion battery warranty, the WH18DGL has the power to drive stubborn screws and bolts, and can do so in tight quarters. With1,280 in/lbs of torque, up to 2,400 RPM and 3,200 impacts per minute there are few jobs this impact driver can't handle. A convenient LED light illuminates dark work spaces and a 1/4" hex chuck provides simple and quick bit replacements.

WH18DSAL

Rated "Best Buy" by a leading consumer publication and covered by Hitachi's Lifetime Lithium Ion tool warranty, the WH18DSAL compact pro impact driver features an 18-volt Lithium Ion slide battery. It is impressively lightweight and compact at less than 7" in length and weighing only 3.3lbs. The WH18DSAL is the ideal impact driver for heavier applications like tightening and loosening carriage bolts, driving lags and sinking screws. Additionally, it can drill into wood, metal and concrete.

WH18DSDL

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the WH18DSDL impact driver is powered by an 18V Lithium Ion slide-type battery for fade free power, less weight and 3x the total battery life of traditional batteries. Featuring an industrial grade 2-piece motor that produces up 1,510 in-lbs of torque, the WH18DSDL impact driver is able to handle the toughest jobs like sinking lag bolts, driving machine screws, fastening deck screws or just tackling miscellaneous work around the shop.

WR18DBDL

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the WR18DBDL impact wrench is part of a series of 18V Brushless Lithium Ion cordless tools. Hitachi's Brushless motor technology delivers more power to the motor by minimizing unnecessary energy loss through friction and heat. Managed by a micro-processor chip that efficiently delivers current flow to the motor, Brushless tools experience up to 50% longer run time between charges, increased power, and extended durability with essentially no maintenance. Hitachi's signature ergonomic design for the tool body makes it extremely well-balanced and comfortable for extended use.

WR18DSDL

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the WR18DSDL impact wrench is powered by an 18V Lithium Ion slide-type battery for fade free power, less weight and 3x the total battery life of traditional batteries. Featuring an industrial grade 2-piece motor that produces up 188 ft-lbs of torque, the WR18DSDL impact wrench is designed to handle the toughest jobs like sinking lag bolts, driving machine screws, maintaining small machinery or just tackling miscellaneous work around the shop.

WR18DSHL

This 18V slide-type impact wrench is a powerhouse, with a professional grade motor producing up to 1,500 RPM, 2,000 impacts per minute and 354 foot-pounds of torque. It also features a tumbler trigger for immediate forward and reverse direction selection. The built-in LED light is convenient for low light area, such as mechanical shops and warehouses, and a battery fuel level indicator minimizes frustrating downtime by helping anticipate battery swaps. The WR18DSHL comes equipped with Hitachi's 4.0Ah batteries for 33% more run time without adding weight or size.

New Drills/Fastening

New Metalworking

RH600T

The RH600T Dual Temperature Heat Gun is the ideal tool for stripping paint, softening and removing adhesives, removing flooring, thawing frozen pipes, loosening rusted nuts and bolts, shaping plastic and PVC, drying paint or plaster, heat shrinking packaging and tubing and much more. The low heat setting reaches 660 degrees Fahrenheit with an air flow of 8.8 CFM. The high heat setting has a max temperature of 930 degrees Fahrenheit with an air flow of 17.7 CFM.

RH650V

The RH650V Variable Temperature Heat Gun is the ideal tool for stripping paint, softening and removing adhesives, removing flooring, thawing frozen pipes, loosening rusted nuts and bolts, shaping plastic and PVC, drying paint or plaster, heat shrinking packaging and tubing and much more. With five heat settings ranging from 8.8 CFM to 17.7 CFM, and a temperature range of 120-1,200 Degrees Fahrenheit, this tool has the power and control needed to tackle a vast range of projects.

New Pneumatics

NR65AK2

The NR65AK2 Strap-Tite strip nailer accepts 1-1/2" and 2-1/2" fasteners while offering superior precision and control for all metal connecting needs. It is ideal for fastening various types of pre-punched hole metal connectors to wood with precise nail placement.

NR65AK2(S)

The NR65AK2S Strap-Tite strip nailer accepts 1-1/2" and 2-1/2" fasteners while offering superior precision and control for all metal connecting needs. It is ideal for fastening various types of pre-punched hole metal connectors to wood with precise nail placement. The short magazine allows nailing in even the tightest of spaces.

NR83A3

The NR83A3 Full Round Head Framing Nailer with Depth Adjustment is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and mobile home and modular home construction.

NR83A3(S)

The NR83A3(S) Full Round Head Framing Nailer (without Depth Adjustment) is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and mobile home and modular home construction.

NR83AA4

The NR83AA4 Clipped Head Framing Nailer has the legendary durability and reliability that a Hitachi nailer is known for, but now with faster driving speed and improved response. With the power to drive 2" - 3-1/4" nails into the toughest materials, there is no job this tool can't handle. It is ideal for floor and wall framing, truss build-up, window build-up, etc. construction of subflooring and roof decking, wall sheathing and mobile home and modular house construction.

NT32AE2

The NT32AE2 1-1/4" 18-Gauge Finish Nailer is ideal for trim work, furniture building and other finish applications. It accepts finish nails from 5/8" in length up to 1-1/4".

NV65AN

The NV65AN coil pallet nailer brings power, precision and convenience to the pallet manufacturing industry. Capable of driving nails as large as 2-1/2" x .099" at a rate of 3 per second, the NV65AN is both powerful and efficient. The side load magazine and open nose design offer convenience, while the plastic shield offers safety, deflecting wire collation away from the user. It comes standard with a contact (bump) trigger installed on the tool and an optional sequential trigger in the box.

NV65AN(S)

The NV65AN(S) coil pallet nailer (capable of sequential/single fire only) brings power, precision and convenience to the pallet manufacturing industry. Capable of driving nails as large as 2-1/2" x .099" at a rate of 3 per second, the NV65AN(S) is both powerful and efficient. The side load magazine and open nose design offer convenience, while the plastic shield offers safety, deflecting wire collation away from the user.

NV75AN

The NV75AN coil pallet nailer brings power, precision and convenience to the pallet manufacturing industry. Capable of driving nails as large as 3" x .131" at a rate of 3 per second, the NV75AN is both powerful and efficient. The side load magazine and open nose design offer convenience, while the plastic shield offers safety, deflecting wire collation away from the user. It comes standard with a contact (bump) trigger installed on the tool and an optional sequential trigger in the box.

NV75AN(S)

The NV75AN(S) coil pallet nailer (capable of sequential/single fire only) brings power, precision and convenience to the pallet manufacturing industry. Capable of driving nails as large as 3" x .131" at a rate of 3 per second, the NV75AN(S) is both powerful and efficient. The side load magazine and open nose design offer convenience, while the plastic shield offers safety, deflecting wire collation away from the user.

NV83A4

The NV83A4 Round Head Coil Framing Nailer is used for construction work such as wall sheathing, roof decking, subflooring, mobile and modular home construction, making of wooden boxes, pallets and drums, packing operations in manufacturing plants, and for other types of general packing and crating work.  A selective actuation switch was added to improve functionality and ensures proper nail placement, and a steel tool-less depth of drive dial instead of plastic improves durability.  The NV83A4 provides the same high quality performance and durability expected from Hitachi.

NV90AG

The NV90AG 3-1/2" coil framing nailer packs both the driving power you need and the convenience you want into one, surprisingly lightweight package. It is capable of handling a variety of tasks, driving nails from 1--3/4" x .099" to 3-1/2" x .131". Coil framing nailers are not known for their compact designs, but this coil framing nailer weighs in at only 7.7 lbs with a head height of just 13-1/6". Equipped with a steel head plate for increased durability, this nailer can handle any jobsite need.

New Saws

C10FSBP4

The Hitachi 10" sliding dual compound miter saw offers the ultimate in form and function for trim carpenters, framers and woodworkers. The positive stops on the miter and bevel scales make for easy to read measurements an quick settings. With a 45 degree dual bevel angle range users can quickly flip the saw blade and leave the material in place. The linear ball bearing slide system and white on black miter scale provide superior accuracy and visibility. Electronic speed control keeps RPM's constant and unintended cuts are avoided with the electric brake feature.

C10FSHPS

The Hitachi 10" sliding dual compound miter saw with laser marker offers the ultimate in form and function for trim carpenters, framers and woodworkers. The positive stops on the miter and bevel scales make for easy to read measurements an quick settings. With a 45 degree dual bevel angle range users can quickly flip the saw blade and leave the material in place. The linear ball bearing slide system and white on black miter scale provide superior accuracy and visibility. Electronic speed control keeps RPM's constant and unintended cuts are avoided with the electric brake feature.

C7ST

The C7ST 7-1/4" circular saw cuts quickly and smoothly through OSB, 2x4's, LVL, plywood and other typical framing material. An integrated dust blower ensures a clear line of site and a clean work surface while cutting.

New Woodworking

C10FSBP4

The Hitachi 10" sliding dual compound miter saw offers the ultimate in form and function for trim carpenters, framers and woodworkers. The positive stops on the miter and bevel scales make for easy to read measurements an quick settings. With a 45 degree dual bevel angle range users can quickly flip the saw blade and leave the material in place. The linear ball bearing slide system and white on black miter scale provide superior accuracy and visibility. Electronic speed control keeps RPM's constant and unintended cuts are avoided with the electric brake feature.

C10FSHPS

The Hitachi 10" sliding dual compound miter saw with laser marker offers the ultimate in form and function for trim carpenters, framers and woodworkers. The positive stops on the miter and bevel scales make for easy to read measurements an quick settings. With a 45 degree dual bevel angle range users can quickly flip the saw blade and leave the material in place. The linear ball bearing slide system and white on black miter scale provide superior accuracy and visibility. Electronic speed control keeps RPM's constant and unintended cuts are avoided with the electric brake feature.

C7ST

The C7ST 7-1/4" circular saw cuts quickly and smoothly through OSB, 2x4's, LVL, plywood and other typical framing material. An integrated dust blower ensures a clear line of site and a clean work surface while cutting.

P20ST

The P20ST 3 1/4" Planer is capable of planing, beveling, rabbeting, tapering and side planing of a flush door. Its 5.5 amp motor powers the no-load speed to 17,000 RPM. This planer accepts disposable double edge blades, but includes durable re-sharpenable blades, which are both cost effective and allow for extended use. A max cutting depth of 1/16" gives the user flexibility, and the lightweight design decreases fatigue. The P20ST also allows for dust collection with a dust bag or vacuum attachment to keep the work surface clear of dust and debris.