Hitachi Power Tools

Hitachi: Inspire the Next

NT65M2 2-1/2" 16-Gauge Finish Nailer with Air Duster

  • Integrated air duster button allows air from the compressor to bypass the nailing function and expel air from a hole in the front of the nailer allowing the user to clear away dust and debris from the work surface
  • Tool-less, easy-to-clear nose for quick and simple nail extraction should a nail jam during use
  • Simple flip of the selective actuation switch allows the user to choose between bump fire or sequential fire modes with no additional parts or tools required
  • Tool-less depth of drive dial adjusts to set the nail above the surface for tacking, or be flush or countersunk into the material for ultimate control based on the application
  • 360 degree, fully adjustable exhaust port directs air exhaust away from the user during use
  • 3.7 lbs, lightweight and well-balanced for minimal fatigue and increased maneueverability
  • No-mar tip protects the work surface from damage
  • Elastomer grip adds comfort and provides and secure hold
  • Accepts 16-Gauge fasteners ranging from 1" up to 2-1/2"
  • Download the NT65M2 Tool Card


  • Safety Glasses
  • No Mar Tip
  • Tool Fitting
  • Case
Fastener Type Finish
Magazine Angle Straight
Fastener Length Capacity 1" - 2-1/2"
Fastener Diameter Range 16-Gauge
Magazine Capacity 100 Nails
Magazine Loading Top
Operating Pressure 70-120 psi
Jam Clearing Tool-less
Actuation Bump or Sequential
Tool Length 11-5/8"
Tool Width 2-27/32"
Tool Height 10-7/8"
Weight 3.7 lbs

Warranty Information


Find a Retailer

Related Tools

Related Image

NT65A3 Finish Nailer, 16-Gauge Finish Nails
The NT65A3 16 Gauge 2.5? Finish Nailer is used for finish-nailing of door casings, window casings, and similar frame assemblies, and for fastening of drawer bottoms and similar assembly work in the construction of various cabinets and cases.

Related Image

EC189 8-Gallon Electric Wheeled Air Compressor
The EC189 features an 8 gallon wheelbarrow tank for multiple nail operation and a Cast Iron pump for long life and dependable air production. The low RPM, oil lubricated pump and ball bearing mounted crank shaft ensure dependable performance at the worksite.

Related Image

EC12 Portable 4-Gallon Twin Stack Air Compressor
The EC12 2.0 Peak Hp Air Compressor effectively provides air pressure sufficient to support any pneumatic air-nailer.

Related Image

NT65GB 2-1/2" Gas Powered 16-Gauge Angled Finish Nailer
The NT65GB 16-Gauge Finish Nailer allows the user to move easily around the jobsite without hoses or compressors!  Features include dry fire lockout, low battery indicator, variable position hook, andtool-less jam release and depth of drive.  The NT65GB drives nails from 1-1/4" to 2-1/2" in length and can be used for a variety of finish and trim applications including installation of door jambs, baseboard, chair rails, window casings and crown moulding.