Hitachi Power Tools

Hitachi: Inspire the Next

EC25E 8-Gallon Gas Powered Wheeled Air Compressor

  • 8-gallon twin tank receivers capable of running multiple nailers
  • 6.5hp, industrial Honda GX engine for dependability and power
  • Pneumatic idle control and throttle for added safety
  • Cast iron pump with oil splash lubrication and ball bearing mounted crank shaft for durability
  • 10" fly cooling wheel, coupled with a shroud to direct air over compressor coils, allows continuous use without the threat overheating
  • Twin drain cocks provide easy maintenance
  • Large canister intake filter with replaceable element protects compressor in harsh worksite environments
  • Belt drive lowers pump rpm for longer life
  • Download the EC25E Tool Card
  • Note- the power rating of the engine is the net power output tested on a production engine for the engine model and measured in accordance with SAE J1349 at a specified rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables.

Includes:

  • Synthetic Oil (SAE5W50) 8oz (19210B)
  • Oil Dipstick (724119)
  • Intake Filter (724044)
  • Wheel (724005)
  • Pressure Gauge (724088)
  • Drive Belt (724050)
  • Regulator (724065)
Drive Belt
Motor Honda GX Gas
Power Output 6.5hp Net HP @ 3,600 RPM
Displacement      196 cc         
Motor Rpm 1,380
Max Pressure  125 PSI        
Air Displacement 9.6 cfm @ 90psi
Start/Stop Control 95/120psi
Tank Capacity 8.0 gal
Pump Speed 1,380
Weight 170lbs
Recovery Time 10-sec

Warranty Information

EC25E

Find a Retailer







Related Tools

Related Image

NV45AB2 1-3/4" Coil Roofing Nailer (Side Load)
The NV45AB2's "magazine, depth of drive, and bullet proof design are excellent; you could probably drive an 18-wheeler over this tool and it would still work," Tools of the Trade Magazine, July/August 2005. The 1-3/4" Roofing Nailer is used for various construction works such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine.

Related Image

NR83A2 3-1/4" Plastic Collated Framing Nailer
The NR83A2 Full Round Head Framing Nailer with Depth Adjustment is used for floor and wall framing, truss build-up, window build-up, etc. construction of subflooring and roof decking, wall sheathing and mobile home and modular house construction.

Related Image

NV50A1 2" Coil Utility Nailer
The NV50A1 Wire Collated Utility Nailer is used for the production of wooden boxes, light pallets, wooden furniture, wooden sashes, packing and crate operations in manufacturing plants and construction work such as prefabricated frames.

Related Image

EC2510E 8-Gallon Gas Powered Wheeled Air Compressor

The EC2510E combines contractor grade quality with simplified operation. Designed to work day-in and day-out, this compressor provides plenty of air and cycles from 116 PSI to a maximum of 145 PSI so it turns on well before tools requirements are compromised.