HITACHI Power Tools: Products > Concrete & Masonry

Demolition Hammers	Rotary Spline
Rotary SDS Max	Masonry Saws
Rotary SDS Plus

H45FRV 3/4" Hex Round Double Insulated Demolition Hammer The H45FRV Demolition Hammer improves on the performance, durability and operability of its predecessors by producing 40% more impact energy (now the highest in its class), 45% less vibration and a 30% reduction in tool exertion. More

H45MRY SDS Max Low Vibration Demolition Hammer The H45MRY Demolition Hammer with User Vibration Protection (UVP) Technology is the perfect combination of performance an comfort. Up to 60% less vibration means longer tool life- 30% longer. Best-in-class impact energy, material removal and vibration reduction make this demo hammer 7X more productive. More

H55SCK ¾” Hex Demolition Hammer The H55SCK Demolition Hammer crushes and chips concrete. This model is also capable of edging, grooving, cutting and peeling. Applications include installation of piping/wiring, sanitary facilities, water supplies/drains, harbor facilities and other civil engineering works. More

H60MRV SDS Max Double Insulated Demolition Hammer The H60MRV Demolition Hammer has been engineered for high chipping and demolishing performance with low vibration and noise levels. Hitachi's exclusive IDI (Internal Double Insulation) Technology, internal shock absorbtion mechanisms and original vibration reducing handle provide durability, extend tool life and limit user fatigue. More

H65SD2 1-1/8" Hex Double Insulated Demolition Hammer The H65SD2 Demolition Hammer is ideal for demolishing concrete, groove and channel digging in concrete, asphalt and gravel, tamping/compacting asphalt and gravel roads, cutting asphalt, construction work, piping and wiring work and water supply and drain work. More

H90SE 1-1/8" Hex 70lb Breaker The H90SE crushes and grooves concrete, cuts asphalt, digs gravel roads for applications such as air conditioning, piping and wiring, sanitary facility construction, water and supply drainage, port facilities, road construction and various other civil engineering construction and repair work. More

H90SEKIT4 1-1/8" Hex 70 lb Breaker Kit with Cart and Demolition Bits The H90SEKIT4 comes with a cart and four pieces of steel. This tool crushes and grooves concrete, cuts asphalt, digs gravel roads for applications such as air conditioning, piping and wiring, sanitary facility construction, water and supply drainage, port facilities, road construction and various other civil engineering construction and repair work. More

DH38YE 1-1/2” Spline Rotary Hammer The DH38YE Rotary Hammer is used for crushing, demolition, groove-digging, edging, trimming, removal of concrete, drilling concrete and drilling anchor bolt holes. Applications include installation of air conditioning, piping and wiring, electric fixtures, sanitary facilities, interior finishing and other building, construction and repair work. More

DH40FR 1-9/16” Spline Rotary Hammer The DH40FR Rotary Hammer features a drilling speed that is 10% faster than similar products, while at the same time, produces lower vibration and noise levels than other tools in its class. With an increase in performance, operability and durability the DH40FR takes rotary hammers to a new level. More

DH50SBK 2” Spline Shank Rotary Hammer The DH50SBK Spline Shank 2" Rotary Hammer is used for crushing, demolition, groove-digging, edging, trimming, removal of concrete, drilling concrete and drilling anchor bolt holes. Applications include installation of air conditioning, piping and wiring, electric fixtures, sanitary facilities, interior finishing and other building, construction and repair work.

More

DH40MRY 1-9/16" SDS Max UVP Rotary Hammer The DH40MRY Rotary Hammer with User Vibration Protection is the perfect combination of performance and comfort. Up to 56% less vibration means longer tool life- 30% longer. Best-in-class impact energy and material removal in both drilling and chiseling operations make this rotary hammer 6X more productive. More

DH45MR 1-3/4" SDS Max Rotary Hammer, IDI Technology The DH45MR offers the fastest drilling and chiseling speeds on the market and is engineered to conquer concrete, mortar, tile and other hard materials while including features that maximize user comfort and convenience. More

DH50MRY 2" SDS Max Low Vibration Rotary Hammer The DH50MRY Rotary Hammer with User Vibration Protection is the perfect combination of performance and comfort. Up to 55% less vibration means longer tool life and more productivity enabling the user to get more done before reaching harmful vibration exposure limits. This rotary hammer is engineered for drilling and chiseling through concrete, mortar, tile and other hard materials. More

CC12Y 12” Portable Cut-Off Saw, AC/DC The CC12Y 12" Cut-off Saw cuts sheet metal, concrete, cinder blocks, bricks, reinforcing rods, concrete wire mesh, corrugated floor and ceiling forms. More

CM4SB2 4" Dry-Cut Masonry Saw The CM4SB2 4" Dry-Cut Masonry Saw cuts smoothly through tile, marble, granite, concrete, brick and similar materials. It is the ideal dry-cut saw for professionals who demand a workhorse of a tool at a competitive value. More

CM5SB 5" Concrete Masonry Cutter The CM5SB is designed for tuckpointing, cutting, and grooving concrete, tile, brick and block. More

DH18DL 18V 3.0Ah Lithium Ion SDS Plus Rotary Hammer The DH18DL is a cordless rotary hammer designed with two modes for optimal performance when drilling holes for the installation of concrete anchors. Twenty-five percent less weight than competitive models makes the DH18DL ideal for overhead drilling. More

DH18DLP4 18V SDS Plus Rotary Hammer (Tool Only) The DH18DLP4 is a cordless rotary hammer designed with two modes for optimal performance when drilling holes for the installation of concrete anchors. Available as a tool body only, this rotary hammer is compatible with all Hitachi 18V post-style batteries. Twenty-five percent less weight than competitive models makes the DH18DLP4 ideal for overhead drilling. More

DH22PG 7/8" SDS Plus Rotary Hammer Hitachi's most compact and lightweight SDS hammer ever is designed for overhead or exteded use applications and allows the user to gain access to the tightest areas. The DH22PG is ideal for drilling small-diameter anchor holes in concrete and can also drill through wood and metal, as well as drive fastening applications with a chuck adaptor. More

DH24PB3 15/16" SDS Plus Rotary Hammer The DH24PB3 2-mode 15/16 inch Rotary Hammer drills holes in concrete, tile and brick. With a chuck adapter, this model can drill holes in steel and wood as well as tighten and loosen both machine and wood screws. Applications include installation for air conditioning, pipe and plumbing, electrical work, interior decoration and other civil engineering, construction and repair work. More

DH24PC3 15/16" SDS Plus Rotary Hammer The DH24PC3 3-mode 15/16 inch rotary hammer drills holes in concrete, tile and brick. With a chuck adapter, this model can drill holes in steel and wood as well as tighten and loosen both machine and wood screws. The DH24PC3 can also do light duty chiseling of concrete as well as groove digging and edging. Applications include installation of air conditioning, piping and plumbing, electrical work, interior decoration and other civil engineering, construction and repair work. More

DH24PF3 15/16" SDS Plus Rotary Hammer The DH24PF3 15/16" SDS Plus Rotary Hammer offers the end-user 3-modes of operation. It hammer drills into concrete, brick or stone with ease and offers a best in class drilling speed and impact rate. The DH24PF3 is the ideal tool for plumbing and conduit installation, HVAC and pest control installation, electrical installation, construction and repair work and other civil engineering applications. More

DH25DAL 25.2V 3.0Ah Lithium Ion SDS Plus Rotary Hammer The DH25DAL is a cordless rotary hammer designed with three modes of operation for optimal performance. It can tackle a variety of drilling and chiseling tasks from anchor drilling to tile removal. Compact and lightweight at only 7.9lbs, this cordless rotary hammer is nearly 20% lighter than the leading 36V allowing for greater control and less user fatigue. More

DH25PB 31/32” SDS Plus Rotary Hammer The DH25PB Rotary Hammer offers the end-user 2 modes of operation. Its “rotation and striking” mode can be used to drill anchor holes in concrete, tile and brick. The “rotation only” mode can be used in conjunction with the chuck adapter to drill holes in steel and wood or tighten machine/wood screws. More

DH30PC2 1-3/16" SDS Plus Rotary Hammer The DH30PC2 Rotary Hammer offers the end user three modes of operation. Its rotation and striking mode can be used to drill anchor holes in concrete, tile and brick. The rotation only mode can be used in conjunction with the chuck adapter to drill holes in steel or tighten machine/wood screws. The third mode is the striking only mode. This mode has the ability to strip mortar and tiles, demolish and chisel concrete and groove cut bricks. More

Search

Concrete & Masonry

Demolition HammersBack To Top

Rotary SplineBack To Top

Rotary SDS MaxBack To Top

Masonry SawsBack To Top

Rotary SDS PlusBack To Top