HITACHI Power Tools: Products

New Concrete & Masonry	New Cordless
New Drills/Fastening	New Metalworking
New Pneumatics	New Saws
New Woodworking

CM5SB 5" Concrete Masonry Cutter The CM5SB is designed for tuckpointing, cutting, and grooving concrete, tile, brick and block. More

DH38MS 1-1/2" SDS Max Rotary Hammer, 2-Modes The DH38MS SDS-Max shank rotary hammer is the second tool in a line of next generation hammers from Hitachi. A simple turn of the knob changes the mode from hammer drilling to hammer only, allowing the DH38MS to take on a variety of task including drilling holes in concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods. The 8.4 Amp, 950 Watt motor produces 6.6 ft-lbs of impact energy and delivers fast drilling and chiseling. More

DH38YE2 1-1/2" Spline Shank Rotary Hammer, 2-Modes The DH38YE2 Spline Shank Rotary Hammer is the next generation in Hitachi hammer technology. Compared to its predecessor the DH38YE, the DH38YE2 packs power into a more ergonomic body that is 2.9 lbs lighter, while delivering less vibration and a lower noise level. The DH38YE2 is designed for drilling holes in concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods. More

DH50MRY 2" SDS Max Low Vibration Rotary Hammer, 2-Modes, EVS The DH50MRY Rotary Hammer with User Vibration Protection is the perfect combination of performance and comfort. Up to 55% less vibration means longer tool life and more productivity enabling the user to get more done before reaching harmful vibration exposure limits. This rotary hammer is engineered for drilling and chiseling through concrete, mortar, tile and other hard materials. More

DS10DFL 12V Peak Lithium Ion Micro Driver Drill (1.5Ah) Covered by Hitachi's 10-Year Lithium Ion tool warranty, the DS10DFL is a compact and lightweight micro driver drill. It is the ideal tool for precision drilling and driving applications including general fastening and hardware installations, HVAC and electrical operations, computer and electronics repair, furniture assembly and fine finish work. More

DS18DSAL 18V Lithium Ion Compact Pro Driver Drill with Flashlight (1.5Ah) Covered by Hitachi's 10-Year Lithium Ion tool warranty, the DS18DSAL is the first in Hitachi's Compact Professional series featuring an 18V Lithium Ion slide battery. It is impressively lightweight and compact at 7.7" in length and weighing only 3.5lbs. The DS18DSAL is the ideal driver drill for anyone seeking professional power in the most compact, lightweight and ergonomic tool body on the market. More

KC10DFL 12V Peak Lithium Ion Micro Driver Drill & Impact Driver Combo Kit (1.5Ah) Covered by Hitachi's 10-Year Lithium Ion tool warranty, the KC10DFL is a 2-piece micro series combo kit. The kit offers the impressively lightweight DS10DFL micro driver drill for precision applications and the high torque WH10DFL impact driver. The micro combo kit comes complete with a quick charger, carrying case, two 1.5Ah HXP Lithium Ion batteries and a Phillips driver bit. More

KC18DG6L 18V Lithium Ion 6-Tool Combo Kit (3.0Ah) Covered by Hitachi's 10-Year Lithium Ion tool warranty, the KC18DG6L is an 18-volt, 6-piece, pro-grade combo kit which includes the DV18DL hammer drill, WH18DL impact driver, CR18DL reciprocating saw, C18DL circular saw, G18DL grinder and UB18DL lantern. Also included are two high-capacity 3.0Ah Lithium Ion batteries, a Universal Charger and two durable tool bags for easy transport and storage. More

KC18DHL 18V Lithium Ion Compact Pro 3-Tool Combo Kit (1.5Ah) Covered by Hitachi's 10-Year Lithium Ion tool warranty, the KC18DHL is an 18-volt, 3-piece compact pro combo kit. The kit includes the DS18DSAL 18V compact pro driver drill that delivers 460 in/lbs of torque, the WH18DSAL 18V compact pro impact driver that delivers an impressive 1,280 in/lbs of torque, yet weighs only 3.3 lbs and the UB18DAL flaslight that features a 5-position pivoting head for convenience. Also included are (2) 1.5Ah Lithium Ion slide type batteries, a 40-minute charger, a double sided Phillips Head driver bit, all contained in a durable plastic carrying case. More

KC18DX9L 18V Lithium Ion 9-Tool Combo Kit (3.0Ah) Covered by Hitachi's 10-Year Lithium Ion tool warranty, the KC18DX9L is an 18-volt, 9-piece, pro-grade combo kit which includes the DV18DL hammer drill, WH18DL impact driver, CR18DL reciprocating saw, C18DL circular saw, G18DL angle grinder, CJ18DL jig saw, DH18DL rotary hammer, RB18DL blower and UB18DL lantern. Also included are two high-capacity 3.0Ah Lithium Ion batteries, a Universal Charger and two durable tool bags for easy transport and storage. More

KC18DY9L 18V Lithium Ion 9-Tool Combo Kit (3.0Ah) Covered by Hitachi's 10-Year Lithium Ion tool warranty, the KC18DY9L is an 18-volt, 9-piece, pro-grade combo kit which includes the DV18DL hammer drill, WH18DL impact driver, CR18DL reciprocating saw, C18DL circular saw, G18DL angle grinder, CJ18DL jig saw, DH18DL rotary hammer, WR18DL impact wrench and UB18DL lantern. Also included are two high-capacity 3.0Ah Lithium Ion batteries, a Universal Charger and two durable tool bags for easy transport and storage. More

WH10DFL 12V Peak Lithium Ion Micro Impact Driver (1.5Ah) Covered by Hitachi's 10-Year Lithium Ion tool warranty, the WH10DFL is a compact and lightweight cordless impact driver. It delivers 840 in/lbs of torque in a micro size tool that weighs only 2.2 lbs! It is ideal for heavier applications such as tightening bolts and sinking screws as well as projects like installing cabinetry and windows and hanging doors. More

WH18DSAL 18V Lithium Ion Compact Pro Impact Driver (1.5Ah) Covered by Hitachi's 10-Year Lithium Ion tool warranty, the WH18DSAL compact pro impact driver features an 18-volt Lithium Ion slide battery. It is impressively lightweight and compact at less than 7" in length and weighing only 3.3lbs. The WH18DSAL is the ideal impact driver for heavier applications like tightening and loosening carriage bolts, driving lags and sinking screws. Additionally, it can drill into wood, metal and concrete. More

W6V3SD 4000rpm SuperDrive Kit The W6V3SD SuperDrive Collated Screw System has been developed for the professional subfloor, decking and drywall installer. The 20” extension handle allows the user to install screws in a standing position, reducing user fatigue and improving productivity. More

G10SS 4" 5-Amp Angle Grinder The G10SS 4" Angle Grinder is lightweight and compact offering performance and durability. It is perfect for grinding metal and masonry, removing rust and paint, and sanding various surfaces. More

G12SS 4-1/2" 5-Amp Angle Grinder The G12SS 4-1/2" Angle Grinder is lightweight and compact offering performance and durability. It is perfect for grinding metal and masonry, removing rust and paint, and sanding various surfaces. More

G18SR 7" 15-Amp Angle Grinder, AC/DC The G18SR deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials. More

G18SS 7" 15-Amp Angle Grinder The G18SS 7" Angle Grinder deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as groove cutting, concrete cutting and cutting stone materials. More

G23SR 9" 15-Amp Angle Grinder, AC/DC The G23SR deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials. More

S18SB 7" Vertical Sander The S18SB Vertical Sander has improved power, performance, and features for a variety of applications including preparing and finishing wood, removing paint and rust, making joints flush, polishing synthetic resins, and sanding and polishing metallic surfaces such as auto bodies, appliances, etc. More

CG22EABSLP 21.1 cc Curved Shaft Grass Trimmer To help reduce fatigue and improve user comfort, the Hitachi CG22EABSLP curved shaft grass trimmer features an extra long 54" drive shaft, anti-vibration system, and weighs a mere 10.1 lbs fully assembled. It is powered by a heavy-duty 21.1 cc commercial grade engine that delivers the power and durability expected from a professional grass trimmer. This curved shaft trimmer is ideal for a user who demands performance and reliability backed by an industry leading 7-year consumer warranty and 2-year commercial use warranty. PROMOTION thru December 31, 2010 - get a $30 Visa PrePaid Card with purchase- click to download the rebate form More

CG22EADSLP 21.1cc Split Shaft Grass Trimmer For maximum versatility and value, the multi-functional Hitachi CG22EADSLP split shaft grass trimmer quickly and easily converts into an edger, articulating hedge trimmer, pole saw, mini cultivator or grass trimmer to tackle any landscape. To help reduce fatigue and improve user comfort, this trimmer is equipped with an anti-vibration system and weighs 11.5 lbs fully assembled (with the grass trimmer head). It is powered by a heavy-duty 21.1 cc commercial grade engine that delivers the power and durability expected from a professional grass trimmer. This split shaft trimmer is ideal for users who want to tackle a variety of projects with one tool that adapts to the application at hand. It comes with an industry leading 7-year consumer, 2-year commercial and 1-year rental warranty. More

CG22EASSLP 21.1 cc Straight Shaft Grass Trimmer To help reduce fatigue and improve user comfort and control, the Hitachi CG22EASSLP straight shaft grass trimmer features an extra long 60" solid steel drive shaft, anti-vibration system, and weighs a mere 11 lbs fully assembled. It is powered by a heavy-duty 21.1 cc commercial grade engine that delivers the power and durability expected from a professional grass trimmer. This straight shaft grass trimmer is ideal for a user who demands performance, reliability and durability all backed by an industry leading 7-year consumer, 2-year commercial and 1-year rental warranty. PROMOTION thru December 31, 2010 - get a $40 Visa PrePaid Card with purchase- click to download the rebate form More

CG24EKSL 23.9 cc Straight Shaft Grass Trimmer For more power, the Hitachi CG24EKSL straight shaft grass trimmer comes with a professional 23.9cc engine. Its extra long 60" solid steel drive shaft adds significant durability and extended reach. Equipped with a large pro-style head, this trimmer is ideal for a landowner. It is blade capable to tackle thick brush and weeds. The extra large fuel tank results in extended use and the anti-vibration system provides maximum comfort to get more done with less fatigue. Weighing a mere 12.5 lbs fully assembled, this trimmer is ideal for a user who demands performance, reliability and durability- all backed by an industry leading 7-year consumer, 2-year commercial and 1-year rental use warranty. More

CS33ET14 14" Top Handle Chain Saw, 32.2 cc Featuring a lightweight and compact design, this commercial grade chain saw is ideal for specialty work like pruning, shaping and hobby work. Powered by Hitachi's PureFire low emission two-stroke engine, it contains a chrome-plated cylinder, forged steel connecting rod, and heavy-duty, gear-driven oiler. In addition, this saw has two bar mounting studs to keep the Oregon chain at peak cutting efficiency. Finally, it is backed by Hitachi's industry-leading seven year consumer, two-year commercial and one-year rental use warranty. More

CS40EA18 18" Rear Handle Chain Saw, 40 cc Featuring excellent power and versatility this commercial grade, general use chain saw is ideal for firewood cutting and hobby work. Powered by Hitachi's PureFire low emission two-stroke engine, it contains a chrome-plated cylinder, forged steel connecting rod, and heavy-duty gear driven oiler. In addition, this saw has two bar mounting studs to keep the Oregon chain at peak cutting efficiency. Finally, it is backed by Hitachi's industry-leading seven year consumer, two-year commercial and one-year rental use warranty. More

N2503AF 1" Twin Trigger Flooring Stapler The N2503AF twin trigger flooring stapler drives 3/16" crown staples for securing 1/4" to 7/16" laminate and engineered wood flooring. The small 20-gauge staples are also ideal for working with thin exotic hardwoods, reducing the chance to dimple the floor. A unique dual trigger design allows the user to work comfortably from either the front or rear of the tool, ensuring proper positioning of the tool. With its lightweight and compact design, the N2503AF can be used for extended periods without fatigue and is ideal for getting into the tightest areas. More

N5008AC2 7/16" Standard Crown Stapler The N5008AC2 standard crown stapler is used for construction work such as wall sheathing, roof decking, subfloor installation, mobile and modular home construction and assembling wooden crates and expendable pallets. More

N5009AF 2" Flooring Stapler The N5009AF Flooring Stapler drives 15-1/5 gauge staples in 1-1/2" and 2" lengths for installing 1/2" and 3/4" domestic solid wood flooring. Using a "preferred seating system," the N5009AF guarantees that staples are set at the proper angle and depth. Made of high strength aluminum, this flooring stapler has the durability needed for tough jobsite conditions. More

N5010A 1/2" Standard Crown Stapler The N5010A is ideal for many fastening and installation applications including subflooring, insulation, wall and roof sheathing, and floor and roof decking. It can also be used for cabinetry installation and pallet assembly. More

N5021A 15/16" Wide Crown Stapler The N5021A is ideal for many fastening and installation applications including installing wire lathing, housewrap, roofing materials, and insulation. More

N5024A2 1" Wide Crown Stapler The N5024A2 wide crown stapler is ideal for lathing, sheathing and insulation installation. Its lighter weight (only 4.7 lbs) and cylinder valve firing mechanism provide a powerful response and less user fatigue. More

NC40G 1-1/2" Gas-Powered Concrete Nailer Hitachi's first gas powered concrete nailer drives up to 1-1/2" x .102" plastic head collated pins, and is designed to fasten wood and steel to concrete. Gas power allows the user to work without the need for licensing, unlike powder-actuated tools. More

NP35A 1-3/8" 23-Gauge Micro Pin Nailer Hitachi's NP35A micro pin nailer drives 23-gauge headless pin nails, which produce nearly invisible holes. Lightweight and compact, the NP35A may be used in a variety of applications including cabinets, paneling, small molding and trim, glazed bead, craft work and picture frame assembly. More

NR90ADPR 3-1/2" Paper Collated Framing Nailer The NR90ADPR framing nailer drives paper collated nails from 2 inches up to 3-1/2 inches in length. Weighing only 7 lbs, it is 15% lighter than the leading competitive tools making it easier to use all day, while still providing the power of heavier, bulkier nailers. This nailer can be used for floor and framing, truss build-up, window build-up, subflooring, roof decking, wall sheathing and housing construction. More

NR90AEPR 3-1/2" Plastic Collated Framing Nailer The NR90AEPR framing nailer drives plastic collated nails from 2 inches up to 3-1/2 inches in length. Weighing only 7.5 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build-up, window build-up, subflooring, roof decking, wall sheathing and housing construction. More

NR90AF 3-1/2" Wire Collated Framing Nailer The NR90AF is lightweight and powerful- ideal for framing, siding, decking, pallet assembly, trusses and sheathing. More

NT32AE2 1-1/4" 18-Gauge Finish Nailer The NT32AE2 1-1/4" 18-Gauge Finish Nailer is ideal for trim work, furniture building and other finish applications. It accepts finish nails from 5/8" in length up to 1-1/4". More

NT50AE2 2" 18-Gauge Finish Nailer The NT50AE2 2" 18-Gauge Finish Nailer is ideal for trim work, furniture building and other finish applications. It accepts finish nails from 5/8" in length up to 2". More

NT50AF 2" Flooring Cleat Nailer The NT50AF Flooring Nailer drives 16-gauge T or L cleats from 1-3/16" to 2" in length for nailing 1/2" and 3/4" domestic solid wood flooring. Using a "preferred seating system," the NT50AF guarantees that cleats are set at the proper angle and depth. Made of high strength aluminum, this flooring nailer has the durability needed for tough jobsite conditions. More

NT50AGF 2" Flooring Cleat Nailer (Oil-Less) The NT50AGF Flooring Cleat Nailer comes equipped to blind or face nail 3/4" domestic solid wood flooring. The high capacity magazine will hold up to 175 16-gauge T-cleats from 1-3/16" to 2" in length for fewer reloads. Using a "preferred seating system," the NT50AGF guarantees that cleats are set at the proper angle and depth. With its oil-less design and high strength aluminum housing, this flooring nailer has the durability needed for tough jobsite conditions. More

NT50GS 2" Gas Powered 18-Gauge Finish Nailer The NT50GS 18-Gauge Finish Nailer allows the user to move easily around the jobsite without hoses or compressors! Features include low battery indicator, variable position hook, tool-less jam release and tool-less depth of drive. This 18-Gauge cordless gas nailer drives nails from 5/8" to 2" in length and can be used for a variety of applications including molding installation, cabinet and picture frame assembly, wainscoting, chair rail, window and door casing and decorative trim. More

NT50YF 2" Manual Cleat Nailer The NT50YF manual flooring nailer drives 16-gauge T-cleats from 1-3/16" to 2" in length for nailing 5/8", 3/4" and 33/32" domestic solid wood flooring. Using a "preferred seating system," the NT50YF guarantees that cleats are set at the proper angle and depth. The ratcheting ram reduces the force necessary to set the cleat by allowing multiple blows, returning the ram only after the cleat is completely set. Made of high strength aluminum, this manual flooring nailer has the durability needed for tough jobsite conditions. More

NT65GA 2-1/2" Gas Powered 15-Gauge Angled Finish Nailer The NT65GA 15-Gauge Finish Nailer allows the user to move easily around the jobsite without hoses or compressors! Features include dry fire lockout, low battery indicator, variable position hook, and tool-less jam release and depth of drive. The NT65GA drives nails from 1-1/4" to 2-1/2" in length and can be used for a variety of applications including installation of door and window casings, cabinets and decorative moulding. More

NT65GB 2-1/2" Gas Powered 16-Gauge Angled Finish Nailer The NT65GB 16-Gauge Finish Nailer allows the user to move easily around the jobsite without hoses or compressors! Features include dry fire lockout, low battery indicator, variable position hook, andtool-less jam release and depth of drive. The NT65GB drives nails from 1-1/4" to 2-1/2" in length and can be used for a variety of finish and trim applications including installation of door jambs, baseboard, chair rails, window casings and crown moulding. More

NT65GS 2-1/2" Gas Powered 16-Gauge Finish Nailer The NT65GS 16-Gauge Finish Nailer allows the user to move easily around the jobsite without hoses or compressors! Features include dry fire lockout, low battery indicator, variable position hook, and tool-less jam release and depth of drive. The NT65GS drives nails from 1" to 2-1/2" in length and can be used for a variety of applications including installation of door jambs, baseboard, chair rails, window casings and crown molding. More

NT65MA4 2-1/2" 15-Gauge Angled Finish Nailer with Air Duster The NT65MA4 15-Gauge angled finish nailer is the ideal nailer for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases. Its compact body and angled magazine make for easier placement and operation in tight angles. The integrated air duster clears debris from the work site allowing for faster and cleaner job completion. The NT65MA4 accepts 15-gauge nails from 1-1/4" up to 2-1/2" in length. More

RB24EAP 23.9cc Handheld Blower Covered by Hitachi's industry leading 7-year Consumer warranty, the RB24EAP hand held blower is one of the lightest (8.6 lbs) and most powerful (at 441 CFM) blowers in its class. Available to both homeowners and professionals, the RB24EAP features a purge primer for quick and simple starts, a low emission Pure Fire II engine and large two-finger throttle lever for easier operation. The exceptional balance and light weight make it ideal for small clean up, while it has the power to handle larger yard work. PROMOTION thru Dec 31, 2010- get a $30 Visa PrePaid Card with purchase- click to download the rebate form More

C8FSE 8-1/2" Sliding Compound Miter Saw The introduction of the C8FSE marks the 20th anniversary of Hitachi's development of the first sliding compound miter saw. Lightweight at only 31lbs, the C8FSHE is ideal for trim carpenters, framers and woodworkers who demand precision, reliability, and mobility.
More

C8FSHE 8-1/2" Sliding Compound Miter Saw with Laser Marker & LED Light The introduction of the C8FSHE marks the 20th anniversary of Hitachi's development of the first sliding compound miter saw. It features Hitachi's patented laser marker for cutting accuracy, an adjustable LED worklight, and a best-in-class dust collection system. Lightweight at only 32lbs, the C8FSHE is ideal for trim carpenters, framers and woodworkers who demand precision, reliability, and mobility. More

C8FSE 8-1/2" Sliding Compound Miter Saw The introduction of the C8FSE marks the 20th anniversary of Hitachi's development of the first sliding compound miter saw. Lightweight at only 31lbs, the C8FSHE is ideal for trim carpenters, framers and woodworkers who demand precision, reliability, and mobility.
More

C8FSHE 8-1/2" Sliding Compound Miter Saw with Laser Marker & LED Light The introduction of the C8FSHE marks the 20th anniversary of Hitachi's development of the first sliding compound miter saw. It features Hitachi's patented laser marker for cutting accuracy, an adjustable LED worklight, and a best-in-class dust collection system. Lightweight at only 32lbs, the C8FSHE is ideal for trim carpenters, framers and woodworkers who demand precision, reliability, and mobility. More

M12V2 3-1/4 Peak HP Variable Speed Plunge Router

The M12V2 variable speed router is designed for impressively smooth groove cutting, chamfering, window cutting, trimming, shaping and pattern cutting. It is the ideal router for woodworkers and carpenters who demand precision and reliability.

More

Search

New Products

New Concrete & MasonryBack To Top

New CordlessBack To Top

New Drills/FasteningBack To Top

New MetalworkingBack To Top

New PneumaticsBack To Top

New SawsBack To Top

New WoodworkingBack To Top