Grinders
G12SA3
G12SA3 4-1/2" 8-Amp Angle Grinder

The G12SA3 4-1/2" Angle Grinder deburs diecast product, finishes metal surfaces, grinds welds and torch cut surfaces and groove and cuts concrete.

G12SE2
G12SE2 4-1/2" 9.5-Amp Angle Grinder, AC/DC

The G12SE2 4-1/2" Angle Grinder is compact and powerful. It deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

G12SE2P9
G12SE2P9 4-1/2" 9.5-Amp Angle Grinder, AC/DC (Non Locking Switch)

The G12SE2P9 4-1/2” Angle Grinder with non-locking switch is compact and powerful. It deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

G12SQ
G12SQ 4-1/2" 7.4Amp Paddle Switch Grinder

The G12SQ  4-1/2" 7.4-amp angle grinder offers rugged durability in a small package and features a large paddle switch for ease of use and improved safety. It deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

G12SR4
G12SR4 4-1/2" 6.2-Amp Angle Grinder with 5 Abrasive Wheels

The G12SR4 4 1/2" Angle Grinder removes casting fin, finishes various types of steel, bronze and aluminum materials and castings, grinds welded sections, sections cut by means of an acetylene torch, synthetic resins, slate, brick and marble. With it's small grip diameter, high output power and overload durability, it delivers great performance. This grinder comes with 5 grinding wheels and a carrying case.

G12SS2
G12SS2 4-1/2" 5.1-Amp Angle Grinder

The G12SS2 4-1/2" Angle Grinder is lightweight and compact offering performance and durability. It features a smaller grip diameter, which contributes to more control and less fatigue during continuous use.  It is perfect for grinding metal and masonry, removing rust and paint, and sanding various surfaces.

G12VA
G12VA 4-1/2" 13-Amp Variable Speed Angle Grinder

The G12VA 4-1/2" 13-Amp angle grinder features over 1,500 Watts of power. This grinder utilizes zero voltage restart protection that prevents it from restarting if power is temporarily lost while the tool is in operation. Electronic overload protection shuts the motor off in case of a bind or overload. It also features a variable speed switch to set the RPMs to suit the application, as well as an anti-vibration handle, kick-back reduction, a tool-less wheel guard that can be removed if the job calls for it, and a low-profile, compact design which also allows it to fit into tight spaces. Recommended uses include surface finishing, rust and paint removal, light grinding, concrete finishing, wire cup and wire wheel applications.

G12VE
G12VE 4-1/2" AC Brushless 12-Amp Variable Speed Angle Grinder

The G12VE 4-1/2" 12-Amp angle grinder with AC Brushless features over 1,300 Watts of input power.The Brushless Motor allows the tool to operate over an extra long extension cord with reduced power loss, and also eliminates maintenance of armatures or carbon brushes. This AC Brushless grinder delivers superior performance when powered by a generator due to an internal inverter circuit that regulates uneven power supply for ultimate jobsite performance. It utilizes zero voltage restart protection that prevents it from restarting if power is temporarily lost while the tool is in operation. Electronic overload protection shuts the motor off in case of a bind or overload. The G12VE also features a variable speed switch to set the RPMs to suit the application, as well as kick-back reduction and a low-profile, compact design including an ultra-slim grip diameter (thanks to the Brushless motor) for better control and less fatigue during continuous. Recommended uses include stone polishing, surface finishing, rust and paint removal, light grinding, concrete finishing, wire cup and wire wheel applications.

G13SC2
G13SC2 5" 11-Amp Angle Grinder

The G13SC2 5" Angle Grinder removes casting fin, finishes various types of steel, bronze, and aluminum, grinds welded sections or sections cut by means of acetylene torch and cuts concrete, stone, brick and tile.

G13SC2P9
G13SC2P9 5" 11-Amp Angle Grinder (Non Locking Switch)

The G13SC2P9 5" Angle Grinder with non-locking switch removes casting fin, finishes various types of steel, bronze, and aluminum, grinds welded sections or sections cut by means of acetylene torch and cuts concrete, stone, brick and tile.

G18DBALP4
G18DBALP4 18V Brushless Lithium Ion 4-1/2" Angle Grinder (Tool Body Only)

The G18DBALP4 is a 4-1/2" Brushless Motor cordless grinder that is compact and lightweight and is ideal for when a corded tool is not an option to cut rebar or pipe, grove stone or concrete or grind metal  and masonry. The powerful Brushless motor and Lithium Ion battery technology combine to deliver the speed and torque to produce more work per charge. Available as a tool body only, it is compatible with all Hitachi 18V Lithium Ion slide-type batteries.

G18MRP9
G18MRP9 7" 15-Amp Angle Grinder AC/DC (Non Locking Switch)

The G18MRP9 7” Angle Grinder with non locking switch is equipped with Hitachi’s IDI (Internal Double Insulation) technology that significantly strengthens the body of the tool.  The G18MRP9 deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

G18SCY
G18SCY 7" 15-Amp Low Vibration Angle Grinder, AC/DC

The G18SCY 7" Angle Grinder features User Vibration Protection (UVP) technology which reduces vibration by up to 30%, significantly decreasing user fatigue. It is ideal to debur die-cast products, finish iron, bronze and aluminum and weld and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

G18ST
G18ST 7" 15-Amp Angle Grinder

The G18ST 7" disc grinder deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

G23MRP9
G23MRP9 9" 15-Amp Angle Grinder, AC/DC (Non Locking Switch)

The G23MRP9  9” Angle Grinder with non-locking switch is equipped with Hitachi’s IDI (Internal Double Insulation) technology that significantly strengthens the body of the tool.  The G23MRP9 deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

G23SCY
G23SCY 9" 15-Amp Low Vibration Angle Grinder, AC/DC

The G23SCY 9" Angle Grinder features User Vibration Protection (UVP) technology that reduces vibration by up to 30%, significantly decreasing user fatigue. It is ideal to debur die-cast products, finish iron, bronze and aluminum and weld and torch cut surfaces. It can also be used to cut soft steel materials as well as groove and cut concrete and other stone materials.

G23SR
G23SR 9" 15-Amp Angle Grinder, AC/DC

The G23SR deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

GP2S2
GP2S2 1" 4.7-Amp Die Grinder

The GP2S2 1" 4.7-Amp die grinder is used for finishing dies for press work, die casting, molding, thread cutting dies, tool and other small parts as well as for internal grinding of tools and machine parts. With a slim design and large, easy-slide switch, the GP2S2 is simple to use and ideal for any die grinding project.

GP3V
GP3V 1" 4.7-Amp Variable Speed Die Grinder

The GP3V 1" 4.7-Amp variable speed die grinder is used for finishing dies for press work, die casting, molding, thread cutting dies, tool and other small parts as well as for internal grinding of tools and machine parts. The variable speed control adjusts the RPM from 7,000 to 29,000 depending on the application. Electronic soft start provides a smooth start up and the small grip perimeter provides maximum control, while the locking slide switch prevents fatigue.

GP5V
GP5V 2" 4.7-Amp Variable Speed Die Grinder

The GP5V 2" 4.7-Amp variable speed die grinder is used for finishing dies for press work, die casting, molding, thread cutting dies, tool and other small parts as well as for internal grinding of tools and machine parts. The variable speed control adjusts the RPM from 2,000 to 8,300 depending on the application. Electronic soft start provides a smooth start up and the small grip perimeter provides maximum control, while the locking slide switch prevents fatigue.