New Products
CM75EBP

The CM75EBP 14" 75cc Gas Cut-Off Saw is designed with the professional in mind and is ideal for new construction and renovation jobs that require cutting concrete for small openings for windows and doors and/or cutting paving stones and curbstone in landscaping applications. Portable and easy-to-use, this handheld machine is made for ultimate performance from it's heavy-duty three-stage air filter to the standard water kit to on board tool storage.

DH26PF

The DH26PF 1" SDS Plus Rotary Hammer offers the end-user 3-modes of operation. It covers multiple jobsite needs from drilling, chipping and hammer drilling into concrete, brick or stone with ease. It delivers a top of class drilling speed with higher amps, greater capacity, larger change lever, double overlay side and trigger handles and improved internal mechanics compared to the previous model. The DH26PF is the ideal tool for plumbing and conduit installation, HVAC and pest control installation, electrical installation, construction and repair work and other civil engineering applications.

DH28PFY

The DH28PFY 1-1/8" SDS Plus Rotary Hammer featuring User Vibration Protection (UVP) technology offers the end-user 3-modes of operation. It covers multiple jobsite needs from drilling, chipping and hammer drilling into concrete, brick or stone with ease. It delivers a top of class drilling speed with higher amps, greater capacity, larger change lever, double overlay side and trigger handles and improved internal mechanics compared to the previous model. The DH28PFY is the ideal tool for plumbing and conduit installation, HVAC and pest control installation, electrical installation, construction and repair work and other civil engineering applications.

DH40MEY

The DH40MEY Rotary Hammer with AC Brushless Motor, UVP (User Vibration Protection) and AHB (Aluminum Housing Body) is the perfect combination of performance and comfort.  With top class drilling speed along with UVP, this hammer is made for hard work. It features the AHB construction that provides significant durability and extended tool life. The Brushless Motor allows the tool to operate over an extra long extension cord without power loss, and also eliminates maintenance of armatures or carbon brushes. This rotary hammer delivers superior performance when powered by a generator due to an internal inverter circuit that regulates uneven power supply for ultimate jobsite convenience.

DH45ME

The DH45ME Rotary Hammer with AC Brushless Motor and AHB (Aluminum Housing Body) construction is the perfect combination of performance and comfort.  With top class drilling speed, this hammer is made for hard work. It features the AHB construction that provides significant durability and extended tool life. The Brushless Motor allows the tool to operate over an extra long extension cord without power loss, and also eliminates maintenance of armatures or carbon brushes. This rotary hammer delivers superior performance when powered by a generator due to an internal inverter circuit that regulates uneven power supply for ultimate jobsite convenience.

DH45MEY

The DH45MEY Rotary Hammer with AC Brushless Motor, UVP (User Vibration Protection) and AHB (Aluminum Housing Body) is the perfect combination of performance and comfort.  With top class drilling speed along with UVP, this hammer is made for hard work. It features the AHB construction that provides significant durability and extended tool life. The Brushless Motor allows the tool to operate over an extra long extension cord without power loss, and also eliminates maintenance of armatures or carbon brushes. This rotary hammer delivers superior performance when powered by a generator due to an internal inverter circuit that regulates uneven power supply for ultimate jobsite convenience.

DH52ME

The DH52ME Rotary Hammer with AC Brushless Motor and AHB (Aluminum Housing Body) is the perfect combination of performance and comfort.  With top class drilling speed, this hammer is made for hard work. It features the AHB construction that provides significant durability and extended tool life. The Brushless Motor allows the tool to operate over an extra long extension cord without power loss, and also eliminates maintenance of armatures or carbon brushes. This rotary hammer delivers superior performance when powered by a generator due to an internal inverter circuit that regulates uneven power supply for ultimate jobsite convenience.

DH52MEY

The DH52MEY Rotary Hammer with AC Brushless Motor, UVP (User Vibration Protection) and AHB (Aluminum Housing Body) is the perfect combination of performance and comfort.  With top class drilling speed along with UVP, this hammer is made for hard work. It features the AHB construction that provides significant durability and extended tool life. The Brushless Motor allows the tool to operate over an extra long extension cord without power loss, and also eliminates maintenance of armatures or carbon brushes. This rotary hammer delivers superior performance when powered by a generator due to an internal inverter circuit that regulates uneven power supply for ultimate jobsite convenience.

H90SG

The H90SG 70 lb demolition hammer makes improvements on previous models with greater power, increased performance, lower vibration and a universal tool retainer. The 15 amp motor powers an improved hammering mechanism, which more efficiently transfers energy to the bit, improving demolition performance. A new vibration absorbing main handle produces low full-load vibration, resulting in less user fatigue and greater productivity. This hammer employs a sealed grease system and auto-stop brushes for minimal maintenance and durability.

W6V4SD2

The W6V4SD2 SuperDrive Collated Screw System delivers the perfect combination of speed and power to tackle any drywall to wood or drywall to metal installations. It produces a maximum speed of 4,500 RPM and an impressive torque rating of 81.5 in-lbs making drywall installs much faster, easier and efficient.

W6VB3SD2

The W6VB3SD2 SuperDrive Collated Screw System delivers the perfect combination of speed and power to tackle decking and subfloor projects. The 20" extension shaft allows the user to install screws in a standing position, reducing user fatigue and improving productivity.

WR16SE

The WR16SE Brushless 1/2" Impact tightens and loosens large nuts and bolts with ease. It is ideal for building construction, automotive maintenance, ship building, electrical and plumbing installation and agricultural machinery maintenance. With its powerful 370W Brushless motor, it provides up to 1,900 IPM and 1,600 no-load RPM. This impressive tool combines low maintenance and long life thanks to the Brushless motor technology.

WR22SE

The WR22SE 3/4 inch corded AC Brushless Impact Wrench is ideal for when strong impact strength is needed for tightening and loosening big, stubborn bolts. With it's powerful 800 Watt Brushless motor, it provides the impact strength of up to 2,000 bpm, the speed of 1,400 rpm and the tightening torque of 460 ft-lbs. This tool combines low maintenance and long life thanks to its Brushless motor and the durability of AHB (Aluminum Housing Body) technology. This impact tightens and loosens high tension bolts 5/8" - 7/8" and ordinary bolts 9/16" - 15/16. This tool is ideal for building construction, bridge construction, automobile, ship building, agricultural, electrical & HVAC installation and other various fastening applications.

EC2610E

The EC2610E combines professional quality with reliable operation. Featuring an efficient Honda GX 160 gas powered engine, a durable cast iron air-cooled high-output pump and a convenient baseplate integrated control panel, this compressor is capable of tackling even the most demanding jobsite conditions.

EC710S

The EC710S 6-gallon pancake compressor (sold exclusively as part of the KNT50AB Finish Combo Kit) is ideal for finish work and trim. The oil-free high efficiency 1-HP motor delivers reliable start-ups in cold weather, and is capable of producing 2.8 cfm @ 90 PSI to operate multiple nailers depending on the application. The industrial regulator and gauges allow for easy and accurate PSI adjustments, while the compact, lightweight design ensures easy portability.

EC99S

The EC99S Twin Stack Compressor features an oil-lubricated cast iron pump and 15 Amp direct drive induction motor for longer life. The motor is protected by a thermal overload protection that stops the motor in a possible overheating situation. Weighing just 52.9 lbs, the EC99S has an ergonomic carrying handle to make it easier to transport to any jobsite. A universal quick coupler and steel encased industrial gauges are factory installed on the unit so it is ready to go out of the box. 

KNT50AB

Hitachi's KNT50AB Finish Combo Kit includes the popular NT50AE2 2" 18-Gauge Brad Nailer, the EC710S portable 6-gallon oil-free pancake air compressor and a 25' x 1/4" Hybrid Air Hose. It is a convenient kit that combines quality and performance to tackle a wide variety of finish work and cabinetry projects.

NR38AK

The NR38AK Strap-Tite Strip Nailer accepts 1-1/2" fasteners while offering superior precision and control. It is ideal for fastening various types of pre-punched hole metal connectors to wood with precise nail placement.

NR65AK2

The NR65AK2 Strap-Tite strip nailer accepts 1-1/2" and 2-1/2" fasteners while offering superior precision and control for all metal connecting needs. It is ideal for fastening various types of pre-punched hole metal connectors to wood with precise nail placement.

NR65AK2(S)

The NR65AK2S Strap-Tite strip nailer accepts 1-1/2" and 2-1/2" fasteners while offering superior precision and control for all metal connecting needs. It is ideal for fastening various types of pre-punched hole metal connectors to wood with precise nail placement. The short magazine allows nailing in even the tightest of spaces.

NR90AD(S1)

The NR90AD(S1) framing nailer drives paper collated nails from 2" up to 3-1/2" in length and features Hitachi's next generation "industrial design." The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.

NR90AE(S1)

The NR90AE(S1) framing nailer drives plastic collated nails from 2" up to 3-1/2" in length and features Hitachi's next generation "industrial design." The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7.5 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.

NR90AF(S1)

The NR90AF(S1) framing nailer drives wire weld collated nails from 2" up to 3-1/2" in length and features Hitachi's next generation "industrial design." The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7.3 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.

NT1850DE

The NT1850DE 18-Gauge Cordless  Brad Nailer allows the user to move easily around the jobsite without hoses or compressors! Equipped with Brushless motor technology and powered by a Compact 3.0Ah Lithium Ion battery, it is capable of driving up to 1,650 nails per charge. It employs a unique air spring drive system (similar to Hitachi's pneumatic line) that uses compressed air to drive each nail resulting in zero ramp up time, increased shooting speed, recoil that feels like a pneumatic nailer, quicker response time between drives, better flush driving-even at an angle, and easy maintenance if the need should arise due to fewer parts to manage. It also features a low battery indicator, selective actuation, tool-less jam release, tool-less depth of drive, variable position belt hook and LED light . This 18-Gauge cordless nailer drives nails from 5/8" to 2" in length and can be used for a variety of applications including molding installation, cabinet and picture frame assembly, wainscoting, chair rail, window and door casing and decorative trim.

NT1865DM

The NT1865DM 16-Gauge Cordless Finish Nailer allows the user to move easily around the jobsite without hoses or compressors! Equipped with Brushless motor technology and powered by a Compact 3.0Ah Lithium Ion battery, it is capable of driving up to 1,500 nails per charge. It employs a unique air spring drive system (similar to Hitachi's pneumatic line) that uses compressed air to drive each nail resulting in zero ramp up time, increased shooting speed, recoil that feels like a pneumatic nailer, quicker response time between drives, better flush driving-even at an angle, and easy maintenance if the need should arise due to fewer parts to manage. It also features a low battery indicator, selective actuation, tool-less jam release, tool-less depth of drive, variable position belt hook and LED light . This 16-Gauge cordless finish nailer drives nails from 1" to 2-1/2" in length and can be used for a variety of applications including chair rail, install molding, cabinetry and other finish applications.

NT1865DMA

The NT1865DMA 15-Gauge Cordless Angled Finish Nailer allows the user to move easily around the jobsite without hoses or compressors! Equipped with Brushless motor technology and powered by a Compact 3.0Ah Lithium Ion battery, it is capable of driving up to 1,100 nails per charge. It employs a unique air spring drive system (similar to Hitachi's pneumatic line) that uses compressed air to drive each nail resulting in zero ramp up time, increased shooting speed, recoil that feels like a pneumatic nailer, quicker response time between drives, better flush driving-even at an angle, and easy maintenance if the need should arise due to fewer parts to manage. It also features a low battery indicator, selective actuation, tool-less jam release, tool-less depth of drive, variable position belt hook and LED light . This 15-Gauge cordless angled finish nailer drives nails from 1-1/4" to 2-1/2" in length and can be used for a variety of applications including chair rail, install molding, cabinetry and other finish applications.

NV65AH2

The NV65AH2 coil siding nailer brings power, precision and convenience to the jobsite. Capable of driving nails as large as 2-1/2" x .099" at a rate of 3 per second, the NV65AH2 is both powerful and efficient. With added features like a selective actuation switch, side-load tilt bottom magazine and repositioned depth of drive adjustment dial, this professional siding nailer gets even better. Additional features such as the adjustable air deflector, no-mar nose cap and plastic shield add convenience, and the ability to use both wire or plastic sheet nails creates flexibility.

NV65AN

The NV65AN coil pallet nailer brings power, precision and convenience to the pallet manufacturing industry. Capable of driving nails as large as 2-1/2" x .099" at a rate of 3 per second, the NV65AN is both powerful and efficient. The side load magazine and open nose design offer convenience, while the plastic shield offers safety, deflecting wire collation away from the user. It comes standard with a contact (bump) trigger installed on the tool and an optional sequential trigger in the box.

NV65AN(S)

The NV65AN(S) coil pallet nailer (capable of sequential/single fire only) brings power, precision and convenience to the pallet manufacturing industry. Capable of driving nails as large as 2-1/2" x .099" at a rate of 3 per second, the NV65AN(S) is both powerful and efficient. The side load magazine and open nose design offer convenience, while the plastic shield offers safety, deflecting wire collation away from the user.

NV75AN

The NV75AN coil siding/framing nailer brings power, precision and convenience to the jobsite. Capable of driving nails as large as 3" x .131" at a rate of 3 per second, the NV75AN is both powerful and efficient. The side load magazine and open nose design offer convenience, while the plastic shield offers safety, deflecting wire collation away from the user. It comes standard with a contact (bump) trigger installed on the tool and an optional sequential trigger in the box.

NV75AN(S)

The NV75AN(S) coil siding/framing nailer (capable of sequential/single fire only) brings power, precision and convenience to the jobsite. Capable of driving nails as large as 3" x .131" at a rate of 3 per second, the NV75AN(S) is both powerful and efficient. The side load magazine and open nose design offer convenience, while the plastic shield offers safety, deflecting wire collation away from the user.

NV90AG(S)

The NV90AG(S) framing nailer drives wire collated nails from 1-3/4" up to 3-1/2" in length and features Hitachi's next generation "industrial design." The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7.7 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. The convenient side-load, tilt bottom magazine allows for quick and easy fastener replenishment. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.

UA3810AB

The UA3810AB 10-Gallon ASME Certified Reserve Air Tank is the perfect addition to the jobsite to ensure the air pressure being supplied to all nailers is sufficient, and that the required PSI remains constant- even if the compressor is 200 or more feet away. Simply add this reserve air tank between the compressor and nailers and there will be enough pressure to power five or more nailers operating at the same time. In the event that a nailer requires less PSI than other nailers attached, the UA3810AB has that situation covered with its standard factory installed large knob regulator.

CJ160V

The CJ160V variable speed Jig Saw is equipped with a 7.0 Amp motor, an Auto-Mode feature, low vibration technology and 4-stage orbital action making it ideal for any professional. The new auto-mode feature runs the tool at half power and ramps up to full power once a load is detected. This gives the user the ability to easily start any cut by reducing vibration and increasing control. The CJ160V also features a bright front mounted LED light, improved blade retention system and an included dust collection adapter.

UU240F

The UU240F heavy-duty miter saw stand features a durable steel construction and can accept up to a 12" sliding miter saw. The included auxiliary mounting brackets make it fully universal and eliminate the need of creating an additional mounting surface. The quick-release mounting brackets offer easy mounting and removal of the miter saw from the stand. The non- marring rubber feet on the mounting brackets allow the miter saw to be placed on any surface without fear of scratching. Work supports can extend up to 95.5" to support longer material if needed. The adjustable material stops, installed at each end, facilitate repetitive cutting applications. Large 8" treaded wheels make it easy to transport the saw and stand even on the roughest of jobsites.

UU240R

The UU240R Fold & Roll Heavy-Duty Miter Saw Stand combines efficient single action set-up and take-down with convenient portability and storage. Constructed of durable tubular steel, the saw stand can accept up to a 12" sliding miter saw. Quick release mounting brackets allow the saw to be removed easily for use off the stand, while auxiliary mounting brackets make the stand fully universal and eliminate the need for creating an additional mounting surface. The non- marring rubber feet on the mounting brackets allow the miter saw to be placed on any surface without fear of scratching. Adjustable material supports extend up to 96" to accommodate longer material, and its adjustable stops help with repeated cutting applications. Large rubber treaded wheels make the Fold & Roll Miter Stand readily transportable over even the most rugged jobsite terrain.

CV18DBLP4

Hitachi's 18V Lithium Ion Slide Brushless Oscillating Multi-Tool, CV18DBLP4, is designed to cut, scrape, grind or sand just about anything with the appropriate accessory. It is packed full of innovative features such as soft start for user safety and constant speed control to maintain the speed under load ensuring maximum power is delivered to the application. This product is sold as tool body only (batteries and chargers sold separately), but is compatible with all Hitachi 18V Lithium Ion slide-type batteries and corresponding chargers.

DS10DFL2

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the DS10DFL2 12-Volt Peak driver drill is impressively compact and lightweight at just 2.2 lbs. With two speed settings and 300 in/lbs of torque, the lightweight design doesn't come at the cost of power. This drivers small size is ideal for installation, electrical, HVAC and other trade applications, as well as woodworking and fine finish applications.

DS18DGL

Covered by Hitachi's Lifetime Lithium Ion tool warranty and 2-year Lithium Ion battery warranty, the DS18SGL features a compact, yet efficient battery. With 400 in/lbs of torque, this drill can power through any tough job with ease. A convenient LED light illuminates dark work spaces and a keyless 1/2" chuck provides simple bit replacements. It also features a 22+1 stage clutch with 22 torque settings and a drill mode for precision and control.

G18DBALP4

The G18DBALP4 is a 4-1/2" Brushless Motor cordless grinder that is compact and lightweight and is ideal for when a corded tool is not an option to cut rebar or pipe, grove stone or concrete or grind metal  and masonry. The powerful Brushless motor and Lithium Ion battery technology combine to deliver the speed and torque to produce more work per charge. Available as a tool body only, it is compatible with all Hitachi 18V Lithium Ion slide-type batteries.

KC10DFL2

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the KC10DFL2 is a 12V Peak Combo Kit that includes a driver drill (DS10DFL2) and an impact driver (WH10DFL2). Also included are two 12V Peak Lithium Ion batteries, a 5-position flashlight, quick charger, carrying case, 7-piece bit set and a Phillips #2 driver bit. This compact kit is ideal for installations, electrical work, HVAC and other trade applications as well as for woodworking and fine finish applications.

KC18DGL

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the KC18DGL is an 18V Combo Kit that includes a driver drill (DS18DGL) and an impact driver (WH18DGL). Included alongside the tools are two 18V Lithium Ion batteries that provide fade free power, less weight and 3X the total battery life of traditional NiCd batteries.  Other items included are a quick charger, carrying bag and a double ended Phillips #2 driver bit.

NT1850DE

The NT1850DE 18-Gauge Cordless  Brad Nailer allows the user to move easily around the jobsite without hoses or compressors! Equipped with Brushless motor technology and powered by a Compact 3.0Ah Lithium Ion battery, it is capable of driving up to 1,650 nails per charge. It employs a unique air spring drive system (similar to Hitachi's pneumatic line) that uses compressed air to drive each nail resulting in zero ramp up time, increased shooting speed, recoil that feels like a pneumatic nailer, quicker response time between drives, better flush driving-even at an angle, and easy maintenance if the need should arise due to fewer parts to manage. It also features a low battery indicator, selective actuation, tool-less jam release, tool-less depth of drive, variable position belt hook and LED light . This 18-Gauge cordless nailer drives nails from 5/8" to 2" in length and can be used for a variety of applications including molding installation, cabinet and picture frame assembly, wainscoting, chair rail, window and door casing and decorative trim.

NT1865DM

The NT1865DM 16-Gauge Cordless Finish Nailer allows the user to move easily around the jobsite without hoses or compressors! Equipped with Brushless motor technology and powered by a Compact 3.0Ah Lithium Ion battery, it is capable of driving up to 1,500 nails per charge. It employs a unique air spring drive system (similar to Hitachi's pneumatic line) that uses compressed air to drive each nail resulting in zero ramp up time, increased shooting speed, recoil that feels like a pneumatic nailer, quicker response time between drives, better flush driving-even at an angle, and easy maintenance if the need should arise due to fewer parts to manage. It also features a low battery indicator, selective actuation, tool-less jam release, tool-less depth of drive, variable position belt hook and LED light . This 16-Gauge cordless finish nailer drives nails from 1" to 2-1/2" in length and can be used for a variety of applications including chair rail, install molding, cabinetry and other finish applications.

NT1865DMA

The NT1865DMA 15-Gauge Cordless Angled Finish Nailer allows the user to move easily around the jobsite without hoses or compressors! Equipped with Brushless motor technology and powered by a Compact 3.0Ah Lithium Ion battery, it is capable of driving up to 1,100 nails per charge. It employs a unique air spring drive system (similar to Hitachi's pneumatic line) that uses compressed air to drive each nail resulting in zero ramp up time, increased shooting speed, recoil that feels like a pneumatic nailer, quicker response time between drives, better flush driving-even at an angle, and easy maintenance if the need should arise due to fewer parts to manage. It also features a low battery indicator, selective actuation, tool-less jam release, tool-less depth of drive, variable position belt hook and LED light . This 15-Gauge cordless angled finish nailer drives nails from 1-1/4" to 2-1/2" in length and can be used for a variety of applications including chair rail, install molding, cabinetry and other finish applications.

P18DSLP4

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the P18DSLP4 cordless planer combines comfort and convenience with fade free power, lighter weight and longer total battery life that comes from Lithium Ion battery power. Available as tool body only, it is compatible with all Hitachi's 18V Lithium Ion slide-type batteries (sold separately) and is capable of generating a no-load speed of 16,000 RPM with a 3-1/4" cutting width and a cutting depth of up to 5/64". This ergonomic tool is only 7.3 lbs and is equipped with a battery charge indicator light that warns when the battery life if getting low to reduce unexpected downtime.

RB18DSLP4

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the RB18DSLP4 is a compact 18V blower that has a lot of power for sweeping large surfaces. Available as a tool body only, the RB18DSLP4 features an impressive blowing power for fast and efficient cleaning for any workshop or home. It is compatible with all Hitachi 18V Lithium Ion slide-type batteries (sold separately).

UB18DJL

This 18V cordless LED torch/flash light is designed to efficiently and effectively improve the lighting for any work situation. With over 10 hours of run time (with a 3.0Ah battery) on any setting and 35 different position combinations, this light is sure to be a very convenient addition to a tool collection. With a unique design and lightweight at only 0.7 lbs (without battery) the UB18DJL is sure to be the go-to light for any application.

UR18DSALP4

This convenient and robust radio runs off any 14.4V -18V Hitachi Lithium Ion slide-type battery (sold separately) or 120V mains with included AC cable. The UR18DSALP4 has many great features that include Bluetooth, AM/FM, as well as an auxiliary option to play audio files from an MP3 player or Smart phone. This means users have plenty of options when it comes to selecting music or listening sources. Alongside these options, there is a convenient interface for users to select their preferred radio stations as well as store an MP3/USB device. This radio is also capable of USB charging (when connected via AC or Battery), but it DOES NOT charge Lithium Ion batteries.

WH10DFL2

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the WH10DFL2 is a compact and lightweight cordless impact driver. It delivers 955 in/lbs of torque in a compact size tool that weighs only 2.2 lbs. It is ideal for applications such as tightening bolts and sinking screws as well as projects like installing cabinetry and windows and hanging doors.

WH18DBDL2

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the WH18DBDL2 Triple Hammer Impact Driver is part of Hitachi's 18V Brushless Lithium Ion cordless tool lineup and in a class of its own. This revolutionary professional impact incorporates a third anvil for ultimate torque, less vibration and faster tightening speed. Equipped with four different speed settings, the triple hammer impact driver can conveniently tackle a wide variety of applications with just one tool in hand. It is powered by Hitachi's Compact 3.0Ah battery that delivers the same capacity as a traditional 18V 3.0Ah Lithium Ion battery, but in a significantly smaller footprint with a lighter weight. Hitachi's signature ergonomic tool body design makes it extremely well-balanced and comfortable for extended use.

WH18DGL

Covered by Hitachi's Lifetime Lithium Ion tool warranty and 2-year Lithium Ion battery warranty, the WH18DGL has the power to drive stubborn screws and bolts, and can do so in tight quarters. With1,280 in/lbs of torque, up to 2,400 RPM and 3,200 impacts per minute there are few jobs this impact driver can't handle. A convenient LED light illuminates dark work spaces and a 1/4" hex chuck provides simple and quick bit replacements.

G12SQ

The G12SQ  4-1/2" 7.4-amp angle grinder offers rugged durability in a small package and features a large paddle switch for ease of use and improved safety. It deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

G12SR4

The G12SR4 4 1/2" Angle Grinder removes casting fin, finishes various types of steel, bronze and aluminum materials and castings, grinds welded sections, sections cut by means of an acetylene torch, synthetic resins, slate, brick and marble. With it's small grip diameter, high output power and overload durability, it delivers great performance. This grinder comes with 5 grinding wheels and a carrying case.

G12SS2

The G12SS2 4-1/2" Angle Grinder is lightweight and compact offering performance and durability. It features a smaller grip diameter, which contributes to more control and less fatigue during continuous use.  It is perfect for grinding metal and masonry, removing rust and paint, and sanding various surfaces.

G18DBALP4

The G18DBALP4 is a 4-1/2" Brushless Motor cordless grinder that is compact and lightweight and is ideal for when a corded tool is not an option to cut rebar or pipe, grove stone or concrete or grind metal  and masonry. The powerful Brushless motor and Lithium Ion battery technology combine to deliver the speed and torque to produce more work per charge. Available as a tool body only, it is compatible with all Hitachi 18V Lithium Ion slide-type batteries.

G18ST

The G18ST 7" disc grinder deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

RH600T

The RH600T Dual Temperature Heat Gun is the ideal tool for stripping paint, softening and removing adhesives, removing flooring, thawing frozen pipes, loosening rusted nuts and bolts, shaping plastic and PVC, drying paint or plaster, heat shrinking packaging and tubing and much more. The low heat setting reaches 660 degrees Fahrenheit with an air flow of 8.8 CFM. The high heat setting has a max temperature of 930 degrees Fahrenheit with an air flow of 17.7 CFM.

RH650V

The RH650V Variable Temperature Heat Gun is the ideal tool for stripping paint, softening and removing adhesives, removing flooring, thawing frozen pipes, loosening rusted nuts and bolts, shaping plastic and PVC, drying paint or plaster, heat shrinking packaging and tubing and much more. With five heat settings ranging from 8.8 CFM to 17.7 CFM, and a temperature range of 120-1,200 Degrees Fahrenheit, this tool has the power and control needed to tackle a vast range of projects.

C12RSH2

The C12RSH2 is the top of the line 12" Sliding Dual Compound miter saw ideal for trim carpenters, framers and woodworkers who demand precision and reliability. It is equipped with a compact slide system that requires zero clearance. The fixed rail system allows the saw head to smoothly glide along the fixed rails, eliminating the rear clearance that other sliding miter saws require. The compact slide system decreases the footprint of the saw by up to a foot, saving valuable real estate in any shop environment. The saw also features tall sliding fences that allow for cutting much larger material, while easily sliding out of the way when making bevel cuts. The easily adjustable tool-less laser marker allows even the most novice user to make perfect accurate cuts.

CJ160V

The CJ160V variable speed Jig Saw is equipped with a 7.0 Amp motor, an Auto-Mode feature, low vibration technology and 4-stage orbital action making it ideal for any professional. The new auto-mode feature runs the tool at half power and ramps up to full power once a load is detected. This gives the user the ability to easily start any cut by reducing vibration and increasing control. The CJ160V also features a bright front mounted LED light, improved blade retention system and an included dust collection adapter.