NV75AG 3" Coil Siding/Framing Nailer
NR83A3
NR83A3 3-1/4" Plastic Collated Framing Nailer

The NR83A3 Full Round Head Framing Nailer with Depth Adjustment is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and mobile home and modular home construction.

NR83A3(S)
NR83A3(S) 3-1/4" Plastic Collated Framing Nailer (without Depth Adjustment)

The NR83A3(S) Full Round Head Framing Nailer (without Depth Adjustment) is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and mobile home and modular home construction.

NR83AA4
NR83AA4 3-1/4" Paper Collated Framing Nailer

The NR83AA4 Clipped Head Framing Nailer has the legendary durability and reliability that a Hitachi nailer is known for, but now with faster driving speed and improved response. With the power to drive 2" - 3-1/4" nails into the toughest materials, there is no job this tool can't handle. It is ideal for floor and wall framing, truss build-up, window build-up, etc. construction of subflooring and roof decking, wall sheathing and mobile home and modular house construction.

NR90AD(S1)
NR90AD(S1) 3-1/2" Paper Collated Framing Nailer

The NR90AD(S1) framing nailer drives paper collated nails from 2" up to 3-1/2" in length and features Hitachi's next generation "industrial design." The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.

NR90AE(S1)
NR90AE(S1) 3-1/2" Plastic Collated Framing Nailer

The NR90AE(S1) framing nailer drives plastic collated nails from 2" up to 3-1/2" in length and features Hitachi's next generation "industrial design." The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7.5 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.

NR90AF(S1)
NR90AF(S1) 3-1/2" Wire Weld Collated Framing Nailer

The NR90AF(S1) framing nailer drives wire weld collated nails from 2" up to 3-1/2" in length and features Hitachi's next generation "industrial design." The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7.3 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.

NR90GC2
NR90GC2 3-1/2" Gas Powered Paper Collated Framing Nailer

The NR90GC2 3-1/2 inch Gas Powered Paper Collation Framing Nailer combines cordless utility with traditional framing nailer power. No compressor noise or hoses to wind saves time and energy. Improvements on this second generation tool include a new air filter design, reversible rafter hook and a new switch, which requires less pushing force to operate. This gas nailer is ideal for general contractors, remodelers, construction and service workers who do framing, sub-flooring, fencing, sheathing, decking, truss build-up, modular housing construction, remodeling and punch-list work.

NR90GR2
NR90GR2 Gas Powered Plastic Strip Collated Framing Nailer

The NR90GR2 Gas Powered Plastic Strip Collated Framing Nailer combines utility with traditional nailing power. No compressor noise or hoses to wind saves time, and clean up time after the job is reduced. This nailer is ideal for general contractors who do framing, sub-flooring, fencing, sheathing, decking, truss build-up, modular home construction, remodeling and punch out work.

NV75AN
NV75AN 3" Coil Siding/Framing Nailer

The NV75AN coil siding/framing nailer brings power, precision and convenience to the jobsite. Capable of driving nails as large as 3" x .131" at a rate of 3 per second, the NV75AN is both powerful and efficient. The side load magazine and open nose design offer convenience, while the plastic shield offers safety, deflecting wire collation away from the user. It comes standard with a contact (bump) trigger installed on the tool and an optional sequential trigger in the box.

NV75AN(S)
NV75AN(S) Sequential Only 3" Siding/Framing Nailer

The NV75AN(S) coil siding/framing nailer (capable of sequential/single fire only) brings power, precision and convenience to the jobsite. Capable of driving nails as large as 3" x .131" at a rate of 3 per second, the NV75AN(S) is both powerful and efficient. The side load magazine and open nose design offer convenience, while the plastic shield offers safety, deflecting wire collation away from the user.

NV83A4
NV83A4 3-1/4" Coil Framing Nailer

The NV83A4 Round Head Coil Framing Nailer is used for construction work such as wall sheathing, roof decking, subflooring, mobile and modular home construction, making of wooden boxes, pallets and drums, packing operations in manufacturing plants, and for other types of general packing and crating work.  A selective actuation switch was added to improve functionality and ensures proper nail placement, and a steel tool-less depth of drive dial instead of plastic improves durability.  The NV83A4 provides the same high quality performance and durability expected from Hitachi.

NV90AG
NV90AG 3-1/2" Coil Framing Nailer

The NV90AG 3-1/2" coil framing nailer packs both the driving power you need and the convenience you want into one, surprisingly lightweight package. It is capable of handling a variety of tasks, driving nails from 1--3/4" x .099" to 3-1/2" x .131". Coil framing nailers are not known for their compact designs, but this coil framing nailer weighs in at only 7.7 lbs with a head height of just 13-1/6". Equipped with a steel head plate for increased durability, this nailer can handle any jobsite need.

NV90AG(S)
NV90AG(S) 3-1/2" Coil Framing Nailer

The NV90AG(S) framing nailer drives wire collated nails from 1-3/4" up to 3-1/2" in length and features Hitachi's next generation "industrial design." The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7.7 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. The convenient side-load, tilt bottom magazine allows for quick and easy fastener replenishment. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.